Results 1 to 3 of 3
  1. #1
    Join Date
    Aug 2017
    Posts
    8

    Default Adjustable DIY Wake Shaper

    I am looking into making an adjustable angle DIY shaper. Has anyone made something similar or an adjustable sucks gate for their boat. I have a fixed position suck gate now at about 90 degrees, but am looking to have a bit more versatility to tweak the wake. Does anyone have any suggestions or things they have had success with?
    2006 Mobius LSV

    GIII + 910s in rear locker, DIY surfgate

  2. #2
    Join Date
    Jan 2008
    Location
    Keuka Lake, NY
    Posts
    7,693

    Default

    I used a gate and a long toggle bolt with multiple holes to adjust the angle I think I had four settings.
    I actually found the best wave to have no angle and just an extension of the hull straight back
    A Day at the Lake...Priceless
    A Day in Powder...Endless


    Joe V
    2012 Möbius XLV~ Loaded & Exiled
    2007 Outback V ~ sold

  3. #3
    Join Date
    Aug 2017
    Posts
    569

    Default

    Quote Originally Posted by mattplantz View Post
    I am looking into making an adjustable angle DIY shaper. Has anyone made something similar or an adjustable sucks gate for their boat. I have a fixed position suck gate now at about 90 degrees, but am looking to have a bit more versatility to tweak the wake. Does anyone have any suggestions or things they have had success with?
    Someone posted one on the FB page that had the bottom of the blade attached to a hinge, and the top angle adjusted with a turnbuckle. Pretty slick.
    2014 Moomba Mondo

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •