Info on FAE or OEM surf pipe for '17 Helix

[LAwake]

I tried going to FAE website to get info for a pipe for a Helix and their website hasn't been updated in 4 years. When you try to put in boat info, it only goes to 2015????
Who all on here is a dealer for FAE and can give me some info on a pipe for a Helix?
Also has anyone done an install using the OEM option and what is the difference between an aftermarket FAE and the OEM? I know the OEM is considerably more expensive but is the install easier?

[corvette8189]

I can help you out with FAE
Here is my write up
https://forum.moomba.com/showthread....E-Install-Pics

Pricing on all single exhaust moomba/supra-
FAE $500
Options-
Blended welds $40
Internal Flapper $40
Baffle $20
Install Kit $60 (debond, shims, sealant)

Send me a message for purchase

[jph3]

I’m looking at getting one for my Helix as well... will hit you up. What’s delivery time right now? I am tempted to just get the pipe, but which add-ons are must have?

[Dtbradly]

I'm pretty sure OEM is the exact same thing just about 60% more. My dealer did the install and recommended FAE and said no warranty issues. I ordered basically every option on the FAE. its nice to have. calms down the exhaust noise but you will notice it gets replaced a good bit by engine noise to a certain extent. It kind of made me think something was wrong because it was a noise i wasn't used to hearing as much.

[parrothd]

I'm pretty sure OEM is the exact same thing just about 60% more. My dealer did the install and recommended FAE and said no warranty issues. I ordered basically every option on the FAE. its nice to have. calms down the exhaust noise but you will notice it gets replaced a good bit by engine noise to a certain extent. It kind of made me think something was wrong because it was a noise i wasn't used to hearing as much.

On previous model the noise reduction was huge outise and inside the boat, newer models it only seems to help outside. Others have said to install some dynomat in the engine conpartment. That's my plan as even with fae my craz is still freaking loud.

[LAwake]

I am tempted to just get the pipe, but which add-ons are must have?

I'm wondering about the add-ons as well.

[LAwake]

I can help you out with FAE
Here is my write up
https://forum.moomba.com/showthread....E-Install-Pics

Pricing on all single exhaust moomba/supra-
FAE $500
Options-
Blended welds $40
Internal Flapper $40
Baffle $20
Install Kit $60 (debond, shims, sealant)

Send me a message for purchase

Thanks.......................

[corvette8189]

I’m looking at getting one for my Helix as well... will hit you up. What’s delivery time right now? I am tempted to just get the pipe, but which add-ons are must have?

They are built to order and are currently running 2-3 weeks. This will grow the closer summer gets. Add-ons explained below.

I'm wondering about the add-ons as well.

Blended Welds are polished to blend the weld for a smooth finish. Pic below
Internal Flapper is recommended as it will keep water from entering the exhaust when not running.
Baffle is a pipe with no restriction. It is a pita to install. Pic below.
Install kit you'll need anyways so might as well get it.

[jason1973]

wondering about the dynomat myself. Where is the best place to put it on a mondo/craz?

[Dtbradly]

the v drive access panel, the hump under the rear seat. 4 screws to take it off

wondering about the dynomat myself. Where is the best place to put it on a mondo/craz?