Results 1 to 10 of 22
Thread: AutoWake Always Emptying
Hybrid View
-
02-26-2019, 10:16 PM #1
AutoWake Always Emptying
It seems that the major complaint about AutoWake is that it always empties. So why doesn't SC change the algorithm so if the system senses a need to change the roll, it first fills the high side and if that fails to affect the roll, it stops filling and starts to empty the low side. With the new sensor that determines when the bags are venting water, this would seem to be a very easy software fix but even without that, AutoWake could still try filling and after n seconds if there is no affect in the roll, it stops filling and start emptying the other side. Same idea with pitch. I can code it up and send it on to SC if they need a head start.
BTW I don't have a boat that has AutoWake and have not been in a boat that has AutoWake but hope to be in and own a boat with AutoWake in the next 21 days.Last edited by ghebert1111; 02-26-2019 at 10:19 PM.
Gil Hebert
2014 Mojo
-
02-26-2019, 10:25 PM #2Junior Member
- Join Date
- Mar 2017
- Posts
- 7
My “personal” experience is that if the boat has enough weight, there are no issues. On my boat with a very light passenger (2) load, the only way AW could achieve the desired angles was to drain a fair amount of ballast.
Probably not the answer people want to hear, but the reality is once we added a bit of weight in the right places, auto wakes job was much easier and more consistent. We have a pretty bitchin wave now that we figured it out.
Sent from my iPhone using Tapatalk
-
02-26-2019, 10:29 PM #3
The case I've heard is that it emptys one side to adjust then it emptys the other side to adjust and so on... Again I have no real world experience, but if this is an issue, my idea will address it.
Gil Hebert
2014 Mojo
-
02-27-2019, 04:51 AM #4
I’d guess the reason people think it ALWAYS drains is because most people ALWAYS start from 100% full. It can’t do anything but drain to reach its pitch/roll.
My SA will fill first before draining if there’s a sudden change and the bag isn’t full. In the few times I’ve used it, it actually works pretty well. But now that I know my pitch roll settings for my wave, we just weight accordingly and watch the auto wake display but with the system off so it can’t make changes.Overkill is underrated
2006 Supra 24SSV Gravity Games- traded but never forgotten
2017 Supra SA 400
-
02-27-2019, 09:36 AM #5
^This^
If the ballast is not 100% full then autowake will add to the side that needs more weight before taking weight out of the opposite side. If everything is 100% full then it obviously cannot add if it is already full, all it can do at that point is drain.
The exception to this would be if you select you ballast level based on the amp bar. I know in my 2017 with the 2018 software (amp bar based of rear ballast % instead of actual sensor) if you set the amp at say 60% for wakeboarding it will try to maintain 60% rear weight total. If someone moves and the roll is off and it adds water the opposite side to compensate it will also drain from the side that some moved too to maintain 60%. It might end up at like 70% on one side and 50% on the other but it is still 60% total.David
2017 Moomba Mojo Max Surf Edition, 2 Pair Wetsounds Rev10s powered by an SD2, 6 pair Wetsounds XS650M and Wetsounds XS12 powered by SD6 all controlled by a WS420. 2 Lumitec SeaBlaze X2 Spectrum underwater lights
SOLD***2008 Mobius LSV, Gravity III , Wake Plate, Z5, Exile SX65c's, Exile XM9s, Exile XI12D, Exile Javelin, Exile 30.2***SOLD
-
02-27-2019, 10:08 AM #6
Can the boat fill ballast at any speed or is there a limit? I never paid close attention where the pump intake(s?) is positioned under the hull on the Max.
2019 Moomba Max "MOOMBAE"
Mods: Wakemakers upgrade + 500 lbs of lead
2016 Yamaha AR192 - sold
-
02-27-2019, 10:18 AM #7
-
02-27-2019, 05:46 PM #8
The biggest obstacle of Autowake is for the really experienced guy who weights his boat the old fashioned way manually getting the pitch and roll and doesn’t think a computer can match or better their skills.
Sent from my iPhone using Tapatalk2021 Supra SA 400
2018 Supra SA 400 (SOLD)
Michigan
-
02-27-2019, 06:04 PM #9Senior Member
- Join Date
- Aug 2017
- Posts
- 1,382
The only scenario that I do not use it in is when I have a small crew and I don’t want to lose a single pound. So, harnessing the maximum possible weight, and having movable weight available such as bags of lead, then I skip autowake because I don’t want any empty. And I simply do it’s job for it, except by moving bags. If that makes any sense.
A very handy situation to use it with is when you have a large crew and amplitude is not an issue. In other words, you can afford to lose a few pounds here or there. The other thing that happens with large crews is that people move around. Auto awake is brilliant at minimizing the effect of this.
To address what broke a pilot said earlier, amplitude is handy in that you can choose how drastic you want autowake to be. If you choose the lowest amplitude setting, you can cruise across the lake at cruise speed and maintain a level boat. Autowake will help you with that. Or another possible scenario might be wake boarding with other than full ballast. Then you would use 50% amplitude and It would keep a nice level boat for you without sinking it too much.
Sent from my iPhone using Tapatalk
-
02-27-2019, 07:14 PM #10Senior Member
- Join Date
- Mar 2018
- Location
- ALABAMA
- Posts
- 202
I have a question as it pertains to Autowake. I have a 17 Helix (with upgraded '18 software that provides amplitude) that we use primarily to surf with. My question is about the surf settings (pitch and roll) and are they based strictly off of stock ballast numbers or would they still be the same once you upgrade and add ballast. In other words, I'm running around 5000 pounds total with normal crew, ballast, and lead weight so if I use AW am I still looking to achieve the standard set points or are they obsolete since I'm nowhere near stock numbers? I appreciate any insight. I don't use AW per se but I do toggle in and out of it to check my pitch and roll without leaving it on long enough to engage.
2017 Moomba Helix
Flow 2.0
AutoWake
Surf Edition
WM Rears 1200s
Fresh Air Exhaust
Fat Sac 400s (Midship compartments)
LeadWake bags