Supra SL 2018 vs 2019

[ghebert1111]

And how about the following options:

Tower camera? is it worth getting? We mostly surf so I'm thinking yes.

Sundeck Flip up seats? Comfortable? Are they rarely used? Were they a good idea but not so good on the boat?

[larry_arizona]

Sat on the flip ups at the boat show, fairly comfy.

Locally we can’t legally use these seats while in motion, but, nice option maybe for the sandbar or where it’s legal to sit on the transom in motion.


Sent from my iPhone using Tapatalk

[MJHSupra]

I ordered my SL about a month ago and ordered it with the Ballast fill sensor upgrade. So, it is available on the Supras. Here’s a pic of my build sheet.


Sent from my iPhone using Tapatalk

How many of the Phender Cleats do they install - 4?


Sent from my iPhone using Tapatalk

[moombacraze]

How many of the Phender Cleats do they install - 4?


Sent from my iPhone using Tapatalk

(2) on each side, and (2) on the transom to mount a GoPro. (6) total.


Sent from my iPhone using Tapatalk

[MJHSupra]

(2) on each side, and (2) on the transom to mount a GoPro. (6) total.


Sent from my iPhone using Tapatalk

Good option to choose!! Did not know about the transom.


Sent from my iPhone using Tapatalk

[larry_arizona]

These look pretty easy to install and about $50 each.

https://www.walleyecenter.com/collec...eiver-only-3-8

Although, a suction cup mount seems just as effective


Sent from my iPhone using Tapatalk

[moombacraze]

These look pretty easy to install and about $50 each.

https://www.walleyecenter.com/collec...eiver-only-3-8

Although, a suction cup mount seems just as effective


Sent from my iPhone using Tapatalk

That’s the price for only the receiver end only. You need the fender pins too. You can buy them together for $100 each. You would be $600 just for parts.


Sent from my iPad using Tapatalk

[larry_arizona]

That’s the price for only the receiver end only. You need the fender pins too. You can buy them together for $100 each. You would be $600 just for parts.


Sent from my iPad using Tapatalk

I would only use the receivers for a go pro ram mount. The boat still has the 6 pop out cleats for bumpers etc.

Likely would only install 2 receivers on the transom.

Do the 19’s come with pins for all 6 locations?

Sent from my iPhone using Tapatalk

[ghebert1111]

Regarding the cameras, transom and tower, I assume they have recording capabilities, is that correct? If so do they record to a MicroSD card?

[elevatedconcept]

Gotcha, not sure why you would want to manually adjust swell as the presets nail pitch and roll perfectly with autowake.

Wake plate only helps if you are lacking bow weight when you have a light crew day.


Sent from my iPhone using Tapatalk

Quite the contrary. The heavier the SL/SE get in terms of weight the less plate you need to run because the boat wont need those said pitch and roll settings. The boats when heavy can run 15-20% less in plate. Why is that important? Because with less plate you are leveraging less hull back out of the water. I also tend to think the shape of the wave is better with the hull as flat in the water as possible. Ive ran all of the shop boats with autowake and dont get me wrong it is dynamite. But the factory defaults arent what are awesome, its the ability to now save an updated setting in real time quickly. I have been able to go back and get a legit shot for shot comparison with setups. Think its better? save it. Run it and then evaluate.

For my own personal boat (19 SE) My settings now when heavy are only around 1.5 degrees of roll side to side with around 8.5 degrees of bow rise.

I run 700PnP in the rear and 1k in the nose and its a matter of filling the entire boat and then just surfing side to side all day. Pull some plate out without losing how clean it is and it absolutely kranks...