Page 3 of 3 FirstFirst 123
Results 21 to 28 of 28
  1. #21
    Join Date
    Jan 2006
    Location
    Jacksonville, FL
    Posts
    608

    Default

    I have come up with the dimensions and volume according to the manual for a km12. Did your port include the 1/2” front panel or did the port come thru it? If there’s any sub people in here could you look over my specs? There are 2 figures since I’m undecided on the depth. Thanks

  2. #22
    Join Date
    Jan 2006
    Location
    Jacksonville, FL
    Posts
    608

    Default

    Page from the manual for the km12.

  3. #23
    Join Date
    Jan 2006
    Location
    Jacksonville, FL
    Posts
    608

    Default

    I did not add the port to the drawing yet because I’m. It sure if it needs to come thru the front or be flush below and use the front panel as 3/4” of its 16”.

  4. #24
    Join Date
    May 2018
    Location
    Waynesville, Ohio
    Posts
    481

    Default

    My port came through the face of the panel. You can see the black ring of it if you look close to one of the pictures I posted. I took the outside dimensions of the port to figure the volume of the port assembly. Then I subtracted that from the inside volume of the box to get the total volume close to the specs.


    Sent from my iPhone using Tapatalk

    2018 Moomba Craz
    6.2L Raptor 400
    6 Pump Ballast, Autowake 2.0, Flow 2.0 Surf System
    OJ 15x13 Wake Prop
    Digital Cruise Pro 3 (paddle wheel)
    Wetsounds Rev 10's

    2005 Supra Launch 22SSV - Sold

  5. #25
    Join Date
    May 2018
    Location
    Waynesville, Ohio
    Posts
    481

    Default

    Here are my amp settings. Again I am no expert, but is sounds pretty damn good to me.




    Sent from my iPhone using Tapatalk

    2018 Moomba Craz
    6.2L Raptor 400
    6 Pump Ballast, Autowake 2.0, Flow 2.0 Surf System
    OJ 15x13 Wake Prop
    Digital Cruise Pro 3 (paddle wheel)
    Wetsounds Rev 10's

    2005 Supra Launch 22SSV - Sold

  6. #26
    Join Date
    Jan 2006
    Location
    Jacksonville, FL
    Posts
    608

    Default

    I messed up on my box measurements. I am using a km12. It has a minimum vented of 1.75 ft3. I made my box 1.80ft3 but forgot to add in the port. I really need to build a 2.20ft3. That way once the port is added I’m at 1.75.

  7. #27
    Join Date
    May 2018
    Location
    Waynesville, Ohio
    Posts
    481

    Default

    Scratch the amp settings above. Mike gave me a few tips and these amp settings are much better. It sounded good before, but now it is just ridiculous. Thanks Mike!




    Sent from my iPhone using Tapatalk

    2018 Moomba Craz
    6.2L Raptor 400
    6 Pump Ballast, Autowake 2.0, Flow 2.0 Surf System
    OJ 15x13 Wake Prop
    Digital Cruise Pro 3 (paddle wheel)
    Wetsounds Rev 10's

    2005 Supra Launch 22SSV - Sold

  8. #28
    Join Date
    Oct 2010
    Location
    Lake Wylie NC Area
    Posts
    2,467

    Default

    Awesome! Glad you found some improvements.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •