Results 1 to 10 of 10
-
01-09-2019, 12:08 AM #1Junior Member
- Join Date
- Dec 2018
- Posts
- 7
Need a little help from someone with the 6.2 Raptor 400
Hope this doesn't rub anyone the wrong way, but I need a bit of assistance.. I am doing a restoration on a 1975 Mako center console. I managed to pick up an Indmar Raptor 400 that's basically brand new, originally was in a moomba craz. I need to know a couple of things as far as the wiring goes, and there's no info I can find anywhere. If someone can help, that would be great. I'll just list my questions below:
1. At the transmission end of the motor, there are two connectors, both two wires each. I am assuming it's fuel pump, but why are there two and which is which?
2. The wiring diagram I have references a "paddle" which I'm assuming is a speed sensor wheel. Where does it connect to the system?
3. If you take the cover off, right on top by the throttle body is a two pin connector, not a cable but a plug-in connector, right on top not far from the flame arrestor. What plugs in there?
That's what I have right now. I may have a couple more if this proves fruitful. Thank you in advance.
-
01-10-2019, 06:27 PM #2Junior Member
- Join Date
- Dec 2018
- Posts
- 7
added some pictures
Here's a couple pics of what I'm talking about.
First, the connection on top of the motor by the throttle body.
Next, the two wires I was referring to that appear to be for fuel pump(s). You can also see that one of these connects to a sensor right above the fuel pump... the second picture is a closeup of that sensor. Just trying to figure out how to set up my fuel delivery system.
-
01-11-2019, 10:09 AM #3Senior Member
- Join Date
- Aug 2011
- Posts
- 2,522
Contact indmar, they are pretty good at responding to tech questions.
http://www.instgram.com/jlyons30
2002 Moomba Mobius LSV - Sold
2006 Moomba Mobius LSV - Sold
2017 Moomba Craz - Enzos, Lead
-
01-11-2019, 01:12 PM #4Junior Member
- Join Date
- Dec 2018
- Posts
- 7
-
01-11-2019, 02:11 PM #5Senior Member
- Join Date
- Aug 2011
- Posts
- 2,522
That sucks, if I ask a specific question they've answered it, but haven't been successful in getting diagrams or parts lists from them. It's like pulling teeth. I've contacted skiers choice for wiring diagrams, just say you have a Craz and need the engine wiring diagram.
http://www.instgram.com/jlyons30
2002 Moomba Mobius LSV - Sold
2006 Moomba Mobius LSV - Sold
2017 Moomba Craz - Enzos, Lead
-
01-12-2019, 08:07 PM #6Junior Member
- Join Date
- Dec 2018
- Posts
- 7
-
01-12-2019, 09:35 PM #7Senior Member
- Join Date
- Aug 2011
- Posts
- 2,522
Not till may.. Sorry
http://www.instgram.com/jlyons30
2002 Moomba Mobius LSV - Sold
2006 Moomba Mobius LSV - Sold
2017 Moomba Craz - Enzos, Lead
-
01-12-2019, 10:32 PM #8Senior Member
- Join Date
- Aug 2011
- Posts
- 2,522
Forgot I had this..has some wiring info
https://drive.google.com/file/d/1Pbz...w?usp=drivesdkhttp://www.instgram.com/jlyons30
2002 Moomba Mobius LSV - Sold
2006 Moomba Mobius LSV - Sold
2017 Moomba Craz - Enzos, Lead
-
11-03-2020, 07:25 PM #9Junior Member
- Join Date
- Oct 2020
- Posts
- 2
-
11-03-2020, 09:46 PM #10
I got it. All 341 pages.
1998 Mobius
310 HP PCM
SOLD