Results 111 to 120 of 320
Thread: 2019 Moomba Makai
-
01-12-2019, 09:56 PM #111
I would just ask them bluntly... The dealer thats closest to me (3.5hrs away) are audio guys - BIG custom systems. When I asked him to send me a list of what they would build (I was looking at a max at the time), it was legit equipment ... and legit cost
I did speak with another dealer, and he more or less said 'we can just add stuff from the factory'. I would lean toward custom tuning if thats their response.
-
01-12-2019, 11:28 PM #112
No, I would say most* dealers don’t gave a clue what they’re doing unless they have an audio shop also. I’d be willing to bet most of them don’t even check anything other than if all the speakers work. My SA had gains all over the place when it was delivered.
But tuning is super easy, no need to pay a shop unless you’re just truly a no wrench kind of person lol.
Just pull all the amp side RCA’s, leave 1set at a time plugged in, put the head unit at about 75-80% max volume, and adjust the gain until you hear distortion. Then back it off a bit til you don’t. Then unplug that set and move on to the next set etc... then plug them all in and test it all together.
Also, adjust your crossovers while you’re in there. Once you get the gains set, play with the crossovers.Overkill is underrated
2006 Supra 24SSV Gravity Games- traded but never forgotten
2017 Supra SA 400
-
01-12-2019, 11:38 PM #113Senior Member
- Join Date
- Aug 2017
- Posts
- 1,382
My Makai sub was weak at the outset. Had to bump that gain to match and from there it’s been all good.
The Fusion head unit is dead simple and I really like it coming from my integrated system on my 2016 Supra. It has a KNOB! How novel!
Sent from my iPhone using Tapatalk
-
01-13-2019, 12:50 AM #114
-
01-13-2019, 10:26 AM #115
I took mine to Mobile Innovations to get it tuned and ended up blowing s cabin speaker that weekend. So I don’t recommend them. I tried my best to tune it but at over 1000 a pair for the rev10s I’m sure I went too conservative and left a lot on the table
Sent from my iPhone using TapatalkDavid
2017 Moomba Mojo Max Surf Edition, 2 Pair Wetsounds Rev10s powered by an SD2, 6 pair Wetsounds XS650M and Wetsounds XS12 powered by SD6 all controlled by a WS420. 2 Lumitec SeaBlaze X2 Spectrum underwater lights
SOLD***2008 Mobius LSV, Gravity III , Wake Plate, Z5, Exile SX65c's, Exile XM9s, Exile XI12D, Exile Javelin, Exile 30.2***SOLD
-
01-13-2019, 10:47 AM #1162017 Moomba Craz Surf Edition
Flow 2.0 Surf System w/ AutoWake™
5,600 Lbs Ballast - Enzos + Lead + Sumo
Wet Sounds REV10s + REVO12-XXX
-
01-13-2019, 12:30 PM #117
The only audio option I got with my Max was towers with an amp because I wanted to do everything else myself, but what surprised me was that it came from the factory with 4 gauge cable from the battery switch, to a terminal block with 6 gauge going to the amp. First thing i did was swap it for 0 gauge to a 4 gauge terminal block.
Maybe the Makai is different but I would take a look. I imagine this could cause amps to be underpowered.
Sent from my iPhone using Tapatalk Pro'19 MAX
'13 Mobius LSV - Sold
'05 Mobius LSV - Sold
-
01-13-2019, 04:14 PM #118
-
01-13-2019, 04:21 PM #119
Not sure on the price for a stand alone tune, might wanna give'em a call. They did mine as part of my install but it made a world of difference.
Between my in-boats, REV10s & REVO12 XXX...everything is in balance and no component overpowers another.
Sent from my Note9 using Tapatalk2017 Moomba Craz Surf Edition
Flow 2.0 Surf System w/ AutoWake™
5,600 Lbs Ballast - Enzos + Lead + Sumo
Wet Sounds REV10s + REVO12-XXX
-
01-13-2019, 04:45 PM #120David
2017 Moomba Mojo Max Surf Edition, 2 Pair Wetsounds Rev10s powered by an SD2, 6 pair Wetsounds XS650M and Wetsounds XS12 powered by SD6 all controlled by a WS420. 2 Lumitec SeaBlaze X2 Spectrum underwater lights
SOLD***2008 Mobius LSV, Gravity III , Wake Plate, Z5, Exile SX65c's, Exile XM9s, Exile XI12D, Exile Javelin, Exile 30.2***SOLD