Page 12 of 32 FirstFirst ... 2101112131422 ... LastLast
Results 111 to 120 of 320
  1. #111
    Join Date
    Feb 2017
    Location
    Colorado
    Posts
    255

    Default

    Quote Originally Posted by TXSurf4 View Post

    Do most dealers do a good job tuning these or is it a job for a mobile audio shop?
    I would just ask them bluntly... The dealer thats closest to me (3.5hrs away) are audio guys - BIG custom systems. When I asked him to send me a list of what they would build (I was looking at a max at the time), it was legit equipment ... and legit cost

    I did speak with another dealer, and he more or less said 'we can just add stuff from the factory'. I would lean toward custom tuning if thats their response.

  2. #112
    Join Date
    Sep 2015
    Location
    Conroe, TX
    Posts
    918

    Default

    No, I would say most* dealers don’t gave a clue what they’re doing unless they have an audio shop also. I’d be willing to bet most of them don’t even check anything other than if all the speakers work. My SA had gains all over the place when it was delivered.
    But tuning is super easy, no need to pay a shop unless you’re just truly a no wrench kind of person lol.
    Just pull all the amp side RCA’s, leave 1set at a time plugged in, put the head unit at about 75-80% max volume, and adjust the gain until you hear distortion. Then back it off a bit til you don’t. Then unplug that set and move on to the next set etc... then plug them all in and test it all together.
    Also, adjust your crossovers while you’re in there. Once you get the gains set, play with the crossovers.
    Overkill is underrated

    2006 Supra 24SSV Gravity Games- traded but never forgotten

    2017 Supra SA 400

  3. #113
    Join Date
    Aug 2017
    Posts
    1,382

    Default

    My Makai sub was weak at the outset. Had to bump that gain to match and from there it’s been all good.

    The Fusion head unit is dead simple and I really like it coming from my integrated system on my 2016 Supra. It has a KNOB! How novel!


    Sent from my iPhone using Tapatalk

  4. #114
    Join Date
    Oct 2018
    Location
    Hockley, Tx
    Posts
    1,013

    Default

    Quote Originally Posted by Broke Pilot View Post
    No, I would say most* dealers don’t gave a clue what they’re doing unless they have an audio shop also. I’d be willing to bet most of them don’t even check anything other than if all the speakers work. My SA had gains all over the place when it was delivered.
    But tuning is super easy, no need to pay a shop unless you’re just truly a no wrench kind of person lol.
    Just pull all the amp side RCA’s, leave 1set at a time plugged in, put the head unit at about 75-80% max volume, and adjust the gain until you hear distortion. Then back it off a bit til you don’t. Then unplug that set and move on to the next set etc... then plug them all in and test it all together.
    Also, adjust your crossovers while you’re in there. Once you get the gains set, play with the crossovers.
    If I am being honest I have never messed with stereos or amps but I really enjoy wrenching on things. I will have to do some research on tuning it.


    Sent from my iPhone using Tapatalk
    2019 Makai
    Raptor 450 w/ 1.76 Trans
    WakeMakers 1350s in the rear & 1K in Lead

  5. #115
    Join Date
    Nov 2010
    Location
    Katy, TX
    Posts
    6,368

    Default

    Quote Originally Posted by TXSurf4 View Post
    If I am being honest I have never messed with stereos or amps but I really enjoy wrenching on things. I will have to do some research on tuning it.


    Sent from my iPhone using Tapatalk
    I took mine to Mobile Innovations to get it tuned and ended up blowing s cabin speaker that weekend. So I don’t recommend them. I tried my best to tune it but at over 1000 a pair for the rev10s I’m sure I went too conservative and left a lot on the table


    Sent from my iPhone using Tapatalk
    David

    2017 Moomba Mojo Max Surf Edition, 2 Pair Wetsounds Rev10s powered by an SD2, 6 pair Wetsounds XS650M and Wetsounds XS12 powered by SD6 all controlled by a WS420. 2 Lumitec SeaBlaze X2 Spectrum underwater lights

    SOLD***2008 Mobius LSV, Gravity III , Wake Plate, Z5, Exile SX65c's, Exile XM9s, Exile XI12D, Exile Javelin, Exile 30.2***SOLD

  6. #116
    Join Date
    Jan 2017
    Location
    Katy, TX
    Posts
    1,678

    Default

    Quote Originally Posted by TXSurf4 View Post
    If I am being honest I have never messed with stereos or amps but I really enjoy wrenching on things. I will have to do some research on tuning it.


    Sent from my iPhone using Tapatalk
    If you want to come to Katy, Extreme Off-Road can tune your system with mics, oscilloscope, etc. to get the most out of your components.


    Sent from my Note9 using Tapatalk
    2017 Moomba Craz Surf Edition
    Flow 2.0 Surf System w/ AutoWake™
    5,600 Lbs Ballast - Enzos + Lead + Sumo
    Wet Sounds REV10s + REVO12-XXX

  7. #117
    Join Date
    Nov 2008
    Posts
    477

    Default

    The only audio option I got with my Max was towers with an amp because I wanted to do everything else myself, but what surprised me was that it came from the factory with 4 gauge cable from the battery switch, to a terminal block with 6 gauge going to the amp. First thing i did was swap it for 0 gauge to a 4 gauge terminal block.

    Maybe the Makai is different but I would take a look. I imagine this could cause amps to be underpowered.


    Sent from my iPhone using Tapatalk Pro
    '19 MAX
    '13 Mobius LSV - Sold
    '05 Mobius LSV - Sold

  8. #118
    Join Date
    Oct 2018
    Location
    Hockley, Tx
    Posts
    1,013

    Default

    Quote Originally Posted by RC_Hinojosa View Post
    If you want to come to Katy, Extreme Off-Road can tune your system with mics, oscilloscope, etc. to get the most out of your components.


    Sent from my Note9 using Tapatalk
    I don’t mind trying it my self and learning something in the process, but that sounds like a good option too. Is it pricey to have done?


    Sent from my iPhone using Tapatalk
    2019 Makai
    Raptor 450 w/ 1.76 Trans
    WakeMakers 1350s in the rear & 1K in Lead

  9. #119
    Join Date
    Jan 2017
    Location
    Katy, TX
    Posts
    1,678

    Default

    Quote Originally Posted by TXSurf4 View Post
    I don’t mind trying it my self and learning something in the process, but that sounds like a good option too. Is it pricey to have done?


    Sent from my iPhone using Tapatalk
    Not sure on the price for a stand alone tune, might wanna give'em a call. They did mine as part of my install but it made a world of difference.

    Between my in-boats, REV10s & REVO12 XXX...everything is in balance and no component overpowers another.

    Sent from my Note9 using Tapatalk
    2017 Moomba Craz Surf Edition
    Flow 2.0 Surf System w/ AutoWake™
    5,600 Lbs Ballast - Enzos + Lead + Sumo
    Wet Sounds REV10s + REVO12-XXX

  10. #120
    Join Date
    Nov 2010
    Location
    Katy, TX
    Posts
    6,368

    Default

    Quote Originally Posted by TXSurf4 View Post
    I don’t mind trying it my self and learning something in the process, but that sounds like a good option too. Is it pricey to have done?


    Sent from my iPhone using Tapatalk
    Mobile innovations charged me $100 to blow up a speaker


    Sent from my iPhone using Tapatalk
    David

    2017 Moomba Mojo Max Surf Edition, 2 Pair Wetsounds Rev10s powered by an SD2, 6 pair Wetsounds XS650M and Wetsounds XS12 powered by SD6 all controlled by a WS420. 2 Lumitec SeaBlaze X2 Spectrum underwater lights

    SOLD***2008 Mobius LSV, Gravity III , Wake Plate, Z5, Exile SX65c's, Exile XM9s, Exile XI12D, Exile Javelin, Exile 30.2***SOLD

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •