December Picture Thread

[RC_Hinojosa]

Yeah, they look like 3M Command hooks. I hung a 2x4 in my storage unit and ran a row of screw-in bike hooks so I'm not hanging wet jackets in the boat at the end of the day.

[rdlangston13]

Yeah, they look like 3M Command hooks. I hung a 2x4 in my storage unit and ran a row of screw-in bike hooks so I'm not hanging wet jackets in the boat at the end of the day.

We ran a ratchet strap from one side of our storage to the other and put a bunch of clothes hangers on it so hang up the jackets. It worked out perfect having the strap directly over the rear lockers so it’s easy to reach


Sent from my iPhone using Tapatalk

[Boonejeepin]

Yeah, they look like 3M Command hooks. I hung a 2x4 in my storage unit and ran a row of screw-in bike hooks so I'm not hanging wet jackets in the boat at the end of the day.

The hooks are command strip hooks. I did not want anything to permanently damage the gel coat. They stick on very well but the actual plastic hook pops up and off easily and will sometimes fall into the abyss that is the rear locker of the Max. Not really a big problem but a bit of a pain.


Sent from my iPhone using Tapatalk

[rdlangston13]

Lumitec 101436 SeaBlazeX Mini Spectrum LED Underwater Boat Light, Surface Mount, RGBW Full-Color Output https://www.amazon.com/dp/B01M3VC6K0..._qtNgCbATCG47K


Sent from my iPhone using Tapatalk

How is the clarity of the water where you boat? These seem like a reasonably priced option over going with the standard rgb sea blaze lights, just wondering if they put out enough light to be seen in our water in south east TX.


Sent from my iPhone using Tapatalk

[Boonejeepin]

How is the clarity of the water where you boat? These seem like a reasonably priced option over going with the standard rgb sea blaze lights, just wondering if they put out enough light to be seen in our water in south east TX.


Sent from my iPhone using Tapatalk

The clarity in Lake Mead and Powell are decent. The CA lakes are just OK. I’ll try to post some pics when I get a change to light up the evening.


Sent from my iPhone using Tapatalk

[TXSurf4]

More pics


Sent from my iPhone using Tapatalk

The polishing of the plates looks great! Did you remove them to do it or do it in place?? So you know if it effects the wake/wave?

[Boonejeepin]

The polishing of the plates looks great! Did you remove them to do it or do it in place?? So you know if it effects the wake/wave?

I removed the surf tabs and worked on the center plate with it still attached to the hinge. The plates looked pretty bad after a year. I should have taken a before pic.

I don’t believe there will be any performance changes. The water is still being forced down when the tab is down. I believe the Supra plates have a more polished surface.

I sanded the plates using wet/dry sand paper and WD40 as a lubricant, then polished.

Sent from my iPhone using Tapatalk

[bergermaister]

Still blows me away how much storage you have in that monster! Also surprised to see the transom tie downs attach to the platform bracket - that seems lit a lot of added stress vs straight up to the hull?

Lights look great though. Hope to see them in person this year.

[dakota4ce]

Thank you.

I hope the sound deadening helps. I am not sure what to expect.


Sent from my iPhone using Tapatalk

It helps.


Sent from my iPhone using Tapatalk

[996scott]

Still blows me away how much storage you have in that monster! Also surprised to see the transom tie downs attach to the platform bracket - that seems lit a lot of added stress vs straight up to the hull?

Lights look great though. Hope to see them in person this year.

that was my first thought as well. I wouldn't want those straps on the swim platform either.