Page 3 of 5 FirstFirst 12345 LastLast
Results 21 to 30 of 48
  1. #21
    Join Date
    Jan 2017
    Location
    Katy, TX
    Posts
    551

    Default

    Yeah, they look like 3M Command hooks. I hung a 2x4 in my storage unit and ran a row of screw-in bike hooks so I'm not hanging wet jackets in the boat at the end of the day.
    2017 Moomba Craz Surf MAX Edition
    Flow 2.0 Surf System w/ AutoWake™
    4,600 Lbs Ballast - Enzos + Lead
    Wet Sounds REV10s + REVO12-XXX

  2. #22
    Join Date
    Nov 2010
    Location
    Katy, TX
    Posts
    5,676

    Default

    Quote Originally Posted by RC_Hinojosa View Post
    Yeah, they look like 3M Command hooks. I hung a 2x4 in my storage unit and ran a row of screw-in bike hooks so I'm not hanging wet jackets in the boat at the end of the day.
    We ran a ratchet strap from one side of our storage to the other and put a bunch of clothes hangers on it so hang up the jackets. It worked out perfect having the strap directly over the rear lockers so it’s easy to reach


    Sent from my iPhone using Tapatalk
    David

    2017 Moomba Mojo Max Surf Edition, 2 Pair Wetsounds Rev10s powered by an SD2, 6 pair Wetsounds XS650M and Wetsounds XS12 powered by SD6 all controlled by a WS420.

    SOLD***2008 Mobius LSV, Gravity III , Wake Plate, Z5, Exile SX65c's, Exile XM9s, Exile XI12D, Exile Javelin, Exile 30.2***SOLD

  3. #23
    Join Date
    Jul 2011
    Location
    Murrieta, CA
    Posts
    1,465

    Default

    Quote Originally Posted by RC_Hinojosa View Post
    Yeah, they look like 3M Command hooks. I hung a 2x4 in my storage unit and ran a row of screw-in bike hooks so I'm not hanging wet jackets in the boat at the end of the day.
    The hooks are command strip hooks. I did not want anything to permanently damage the gel coat. They stick on very well but the actual plastic hook pops up and off easily and will sometimes fall into the abyss that is the rear locker of the Max. Not really a big problem but a bit of a pain.


    Sent from my iPhone using Tapatalk
    2018 Max with a little extra weight here and there

  4. #24
    Join Date
    Nov 2010
    Location
    Katy, TX
    Posts
    5,676

    Default

    Quote Originally Posted by Boonejeepin View Post
    Lumitec 101436 SeaBlazeX Mini Spectrum LED Underwater Boat Light, Surface Mount, RGBW Full-Color Output https://www.amazon.com/dp/B01M3VC6K0..._qtNgCbATCG47K


    Sent from my iPhone using Tapatalk
    How is the clarity of the water where you boat? These seem like a reasonably priced option over going with the standard rgb sea blaze lights, just wondering if they put out enough light to be seen in our water in south east TX.


    Sent from my iPhone using Tapatalk
    David

    2017 Moomba Mojo Max Surf Edition, 2 Pair Wetsounds Rev10s powered by an SD2, 6 pair Wetsounds XS650M and Wetsounds XS12 powered by SD6 all controlled by a WS420.

    SOLD***2008 Mobius LSV, Gravity III , Wake Plate, Z5, Exile SX65c's, Exile XM9s, Exile XI12D, Exile Javelin, Exile 30.2***SOLD

  5. #25
    Join Date
    Jul 2011
    Location
    Murrieta, CA
    Posts
    1,465

    Default

    Quote Originally Posted by rdlangston13 View Post
    How is the clarity of the water where you boat? These seem like a reasonably priced option over going with the standard rgb sea blaze lights, just wondering if they put out enough light to be seen in our water in south east TX.


    Sent from my iPhone using Tapatalk
    The clarity in Lake Mead and Powell are decent. The CA lakes are just OK. I’ll try to post some pics when I get a change to light up the evening.


    Sent from my iPhone using Tapatalk
    2018 Max with a little extra weight here and there

  6. #26
    Join Date
    Oct 2018
    Location
    Hockley, Tx
    Posts
    104

    Default

    Quote Originally Posted by Boonejeepin View Post
    More pics


    Sent from my iPhone using Tapatalk
    The polishing of the plates looks great! Did you remove them to do it or do it in place?? So you know if it effects the wake/wave?
    2019 Makai (On Order)

  7. #27
    Join Date
    Jul 2011
    Location
    Murrieta, CA
    Posts
    1,465

    Default December Picture Thread

    Quote Originally Posted by TXSurf4 View Post
    The polishing of the plates looks great! Did you remove them to do it or do it in place?? So you know if it effects the wake/wave?
    I removed the surf tabs and worked on the center plate with it still attached to the hinge. The plates looked pretty bad after a year. I should have taken a before pic.

    I don’t believe there will be any performance changes. The water is still being forced down when the tab is down. I believe the Supra plates have a more polished surface.

    I sanded the plates using wet/dry sand paper and WD40 as a lubricant, then polished.

    Sent from my iPhone using Tapatalk
    Last edited by Boonejeepin; 12-20-2018 at 08:07 PM.
    2018 Max with a little extra weight here and there

  8. #28
    Join Date
    Jun 2007
    Location
    Vancouver, WA
    Posts
    5,112

    Default

    Still blows me away how much storage you have in that monster! Also surprised to see the transom tie downs attach to the platform bracket - that seems lit a lot of added stress vs straight up to the hull?

    Lights look great though. Hope to see them in person this year.
    The years have been kind, it's the weekends that have done the damage.

    2001 MobiusV - Loaded with Ballast, Exile, Blood, Sweat & Beers

  9. #29
    Join Date
    Aug 2017
    Posts
    703

    Default

    Quote Originally Posted by Boonejeepin View Post
    Thank you.

    I hope the sound deadening helps. I am not sure what to expect.


    Sent from my iPhone using Tapatalk
    It helps.


    Sent from my iPhone using Tapatalk

  10. #30
    Join Date
    May 2010
    Location
    Salt Lake City, Utah
    Posts
    991

    Default

    Quote Originally Posted by bergermaister View Post
    Still blows me away how much storage you have in that monster! Also surprised to see the transom tie downs attach to the platform bracket - that seems lit a lot of added stress vs straight up to the hull?

    Lights look great though. Hope to see them in person this year.
    that was my first thought as well. I wouldn't want those straps on the swim platform either.
    Scott
    2007 Mobius LSV with a lot of great upgrades and mods

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •