^^agree with Stazi. My Makai was actually kind of a PITA. Pretty decent amount of knuckle skinning. Need help for sure during the slide hose over pipe stub while inserting it covered with 5200 phase. That’s not the easiest thing in the world. Then retighten several hose clamps.

Don’t forget, if you’re going to do it “right”, you will remove the small SS pipe section that contains the baffle and either knock it out or replace with new, non baffled pipe.

That part is also a bit of a project.

A helper is damn near a must if you want to keep the cussing down to a reasonable level.


Sent from my iPhone using Tapatalk