Results 1 to 10 of 114
Thread: October 2018 Picture Thread
-
10-01-2018, 04:41 PM #1
October 2018 Picture Thread
The all new Makai in action. Out of the box 4,000 lbs and tricks got thrown. This family has a dialed Max and looking to go Makai. With Moomba Launch and fully weighted it was about 30 seconds to plane. Does have the new 450 with the new gearing. Not bad for 6000’ above sea level in Utah.
DFTR Josh (downfortheride)
www.marine-products.com
Discount code: DFTRLast edited by kaneboats; 10-03-2018 at 01:31 PM.
-
10-01-2018, 05:01 PM #2Senior Member
- Join Date
- Aug 2017
- Posts
- 1,382
October 2019 Picture Thread
So you’re saying it wakeboards......
6000’ that’s bad ass!
Sent from my iPhone using Tapatalk
-
10-01-2018, 06:57 PM #3
-
10-01-2018, 07:06 PM #4Senior Member
- Join Date
- Aug 2017
- Posts
- 1,382
Surf takes weight, but is SOLID. The wakemakers bag upgrade forthcoming is likely to be a must have.
Sent from my iPhone using Tapatalk
-
10-01-2018, 08:52 PM #5
-
10-02-2018, 06:11 PM #6
-
10-02-2018, 07:48 PM #7
What happened to that poor board? Lol I’d like to see a video of that
Overkill is underrated
2006 Supra 24SSV Gravity Games- traded but never forgotten
2017 Supra SA 400
-
10-03-2018, 09:11 AM #8
A little peek at my GatorStep project...
I just have my sundeck walkthrough and swim platform left.
**PRO tip, get the 3M adhesive remover wheel**
Some pieces pulled right off without leaving any adhesive behind, the pieces that did, had a membrane over the adhesive that made acetone and mineral spirits useless.
p.s. the wheel WILL fling sticky adhesive boogers EVERYWHERE.
Sent from my SAMSUNG-SM-G935A using Tapatalk2017 Moomba Craz Surf Edition
Flow 2.0 Surf System w/ AutoWake™
5,600 Lbs Ballast - Enzos + Lead + Sumo
Wet Sounds REV10s + REVO12-XXX
-
10-03-2018, 09:34 AM #9
That looks great. I think it will be my next mod. Did you have snap in carpet before? Did you fill the holes from them?
FAE Dealer Message me for a Discount!
2017 Moomba Mojo Surf Edition
4600LB Ballast- Enzo Bags & Lead
Fresh Air Exhaust
4 Rev 10 Tower Speakers
-
10-03-2018, 09:59 AM #10