Results 1 to 7 of 7
Thread: Lightbar - Mondo A3
-
09-23-2018, 11:12 PM #1Senior Member
- Join Date
- Sep 2017
- Posts
- 232
Lightbar - Mondo A3
Hey guys,
I am looking to install a lightbar onto my 2017 Mondo and hoping for someone to fast-track my troubleshooting. I have attached the wiring harness diagramwiring.jpg
I was able to validate the "Light Blue" is for the Accent lights in the cabin of the boat. What I am trying to understand is what the following means in relation to my toggle switches:
Light Grey = ??
Dark Blue = ??
Any help would be greatly appreciated!
Thanks all!2022 SA450
2019 Mojo
2017 Mondo - SOLD
-
09-24-2018, 12:16 AM #2Senior Member
- Join Date
- Sep 2017
- Posts
- 232
Sorry I meant
Dark Grey - All Around - Not sure what this is linked to?
Dark Blue - Directional - Not sure what this is linked to?
Thanks again all!2022 SA450
2019 Mojo
2017 Mondo - SOLD
-
09-24-2018, 08:28 AM #3
Gray is 360 anchor
blue is typically lighting, but confirm
-
09-24-2018, 10:24 AM #4
It is Blue. I put lights on mine. But FYI that wore on my Craz didn’t make it to the dash. It was dead ended under the tower. I had to run a connector wire to one of the vacant accessory switches.
Sent from my iPhone using Tapatalk2017 Moomba Craz
-
09-24-2018, 11:11 AM #5Senior Member
- Join Date
- Sep 2017
- Posts
- 232
Thanks guys, I will trace to the base of my tower...i was hoping for an easy button
I guess an extra 15 minutes is still an easy button vs. trying to fish through the tower!
This forum is awesome how quick you get answers!2022 SA450
2019 Mojo
2017 Mondo - SOLD
-
09-29-2018, 12:20 AM #6Senior Member
- Join Date
- Sep 2017
- Posts
- 232
Stazi, I got around to it today...and the dark blue is dead ended exactly like you said...I removed my one speaker and was able to crimp some wire onto it and run under to the Accessory. Thanks again for the advice!
2022 SA450
2019 Mojo
2017 Mondo - SOLD
-
09-29-2018, 03:51 PM #7