Results 1 to 3 of 3
-
08-24-2018, 02:32 PM #1Junior Member
- Join Date
- Jun 2011
- Posts
- 3
2000 Moomba Outback LS (Gauges aren't working!!)
Need some help!! My 2000 Moomba Outback LS gauges aren't working so I'm thinking I need to order new ones. I've heard about a control box but after looking under the dash and everywhere else on the boat I can't locate one. Another question is one of the gauges has a window where my hours are located and it's compromised with water in the glass gauge. I'm curious if I replace the gauge will the hours start over or does it pick up where it left off? I'm selling the boat so I need to get this resolved asap!! Thank you-
-
08-24-2018, 06:00 PM #2
Old boats are not that smart. If you replace the gauge it will start with whatever is on the replacement.
If you're selling you might take a before and after picture to show the seller.
To my knowledge there is no "control box" of any kind.
For your other issues, this thread might help. https://forum.moomba.com/showthread....s-MDC-locationSo when is this "old enough to know better" supposed to kick in?
2001 MobiusV - Slightly Modified...
-
08-25-2018, 01:46 PM #3Member
- Join Date
- Aug 2018
- Location
- Nebraska
- Posts
- 88
This seems to be a big issue with these boats Haha!! Mine still isn't resolved either and injectors are now not firing either