Results 1 to 4 of 4
Thread: 14 Moomba LSV Depth Gauge
-
08-26-2018, 09:45 PM #1
14 Moomba LSV Depth Gauge
Should I try to order the skiers choice depth gauge or go with a hummingbird/fiera/hawkeye?
2014 Moomba Mobius LSV
2005 Moomba Mobius LSV - Sold
-
08-27-2018, 12:15 AM #2
I would just go with an aftermarket, I did that on my LSV because I wanted water-temp.
Malo <--- Means--Evil or Mean One. This explains a lot.
2013 Mojo 2.5 Skylon Tower. Bestia < Beast >
[COLOR="#696969"]
-
08-27-2018, 02:02 PM #3
mmandley - Out of curiosity, was the aftermarket unit a simple plug & play option with the existing dash hole and wiring, or did you need to run a new wire and sending unit? I ask because the stock depth gauge on my '14 LSV has never been particularity accurate, and this summer it's really only been working ~50% of the time so I've been thinking about replacing it myself...
2020 Super Air Natique GS22, Admiral Blue Flake & Tsunami Grey
1936 Chris Craft 19’ Runabout
2014 LSV, Fire Red & Silver Flake (Sold)
-
08-28-2018, 12:04 AM #4
No it was not just as simple as plug and play.
It was drill a big ass 2" hole in my bilge through the hull, then fish the wires up to the dash and yes dropped right into the stock slot.
I had to drill a hole because of the Temp sensor needs to have water contact.
You can check with them, they might have a retro fit to plug into the factory one.Malo <--- Means--Evil or Mean One. This explains a lot.
2013 Mojo 2.5 Skylon Tower. Bestia < Beast >
[COLOR="#696969"]