Results 1 to 3 of 3
Thread: Changing speakers in boat
-
08-25-2018, 07:41 PM #1
Senior Member
- Join Date
- Oct 2010
- Location
- Red Deer Alberta Canada
- Posts
- 324
Changing speakers in boat
Hey Everyone.
I’m not really a audio repair guy, but how hard is it to replace the 6 in boat speakers as a dyi? I have some new kickers in a box that were set to go in my old boat, so I was thinking about putting them in the LSV. I think I have a few speakers that are a touch worn out.
As always, any insight is always very appreciated.
Richard.
Sent from my iPhone using Tapatalk2016 Craz
2007 LSV - Sold
2003 Outback - Sold
-
08-25-2018, 07:49 PM #2
Senior Member
- Join Date
- Oct 2010
- Location
- Lake Wylie NC Area
- Posts
- 2,467
At a minimum, you will need to cut back the leads and crimp on new terminals and drill new screw holes. At the max, you will need to enlarge the moutning hole.
-
08-25-2018, 07:49 PM #3
Senior Member
- Join Date
- Oct 2010
- Location
- Red Deer Alberta Canada
- Posts
- 324
Sorry. Should have put this in the audio section.
Sent from my iPhone using Tapatalk2016 Craz
2007 LSV - Sold
2003 Outback - Sold
Reply With Quote