Results 1 to 3 of 3
  1. #1
    Join Date
    May 2018
    Location
    ANACORTES, WA
    Posts
    89

    Default Do the 2018 come stock with the fathometer and water temp measure feature?

    I bought a 2018 craz new. We realized these feature did not work. The dealer said it was never installed. I thought this was a stock feature? Hell my Yamaha jet boat had it standard.
    2018 Craz, 3000lbs stock ballast, ENZOs, 500lb Lead Ballast, Still chasing the best wave!

  2. #2
    Join Date
    May 2009
    Location
    North End Lake Lanier GA
    Posts
    8,155

    Default

    I have always seen the Depth gauge as an option. Kinda strange if you ask me.

    You might look to see if there is a transducer mounted and maybe not connected, maybe just a software upgrade, I am not sure though. It is a separate part from the paddle wheel and temp sensor.
    Malo <--- Means--Evil or Mean One. This explains a lot.
    2013 Mojo 2.5 Skylon Tower. Bestia < Beast >
    [COLOR="#696969"]

  3. #3
    Join Date
    Jan 2018
    Location
    Lexington, KY
    Posts
    369

    Default

    I got the exact same thing when I took mine in because it didn't work. I was a little embarrassed. I had them install it for a couple of hundred bucks and all is good now!

    It's under Options>Miscellaneous>Depth Finder on the builder.
    2018 Moomba Craz | Autowake 2.0, Zero-Off, G6 Pumps | Captain Blue/Dark Graphite/Silver Flake | Enzos + Lead

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •