Results 1 to 10 of 10
-
06-30-2018, 08:30 AM #1
Rack Suggestoins for a 2003 Mobius?
We have a 2003 with the stock Rad a Cage tower. I just got a new board which will not fit in the compartments, so I need to get it up on the racks. Any suggestions on a good setup. Ideally, we would do 5 (2 surf, three wakeboards). I have seen some suggestions for the Krypt racks, but I can not find anything which will fit the veritcal oval bars.
Thanks in advance!
-- bk2003 Mobius LSV Gravity Games
Total Noob running 1100 in the center, 750s in the lockers.
JL JX360/4 powering 6 Infinity 621m speakers
-
07-01-2018, 12:42 PM #2Junior Member
- Join Date
- Apr 2018
- Posts
- 17
I went with bullet lines but not digging where I have to put them. It’s really high to get the angle reasonable front to back due to the swoop of the circular tubing of the cage .
-
07-01-2018, 02:20 PM #3
-
07-01-2018, 02:54 PM #4Senior Member
- Join Date
- May 2016
- Location
- West Milwaukee, WI
- Posts
- 283
Not a great shot, but here's how our bullet lines/indy flat bimini is set up. For the price, we love it.
Sent from my OnePlus 5 using Tapatalk2004 Mobius LS - hooked on footin'
Former tow: 1986 Chaparral 178 XL, 90hp Merc
First tow: 197x Glasspar Citation, 135hp Merc
-
07-01-2018, 02:58 PM #5Senior Member
- Join Date
- May 2016
- Location
- West Milwaukee, WI
- Posts
- 283
Here's a close up of the back mount.
Sent from my OnePlus 5 using Tapatalk2004 Mobius LS - hooked on footin'
Former tow: 1986 Chaparral 178 XL, 90hp Merc
First tow: 197x Glasspar Citation, 135hp Merc
-
07-01-2018, 03:28 PM #6
I had an 05 Supra 22 SSV with a Rad a Cage tower. I assume it is similar to yours. Roswell were the stock tines and I added ski racks above them. They are expensive, but worked really well. You can buy swivel mounts, which I would recommend. I had the racks for a surf board on top and Wakeboard on the bottom. You can put a Wakeboard in the surfboard slot if you need too.
Sent from my iPhone using Tapatalk
2018 Moomba Craz
6.2L Raptor 400
6 Pump Ballast, Autowake 2.0, Flow 2.0 Surf System
OJ 15x13 Wake Prop
Digital Cruise Pro 3 (paddle wheel)
Wetsounds Rev 10's
2005 Supra Launch 22SSV - Sold
-
07-02-2018, 01:02 PM #7
Thanks for sharing. THis photo seems to show newer tines that fit the crossbar. Where did those come from?
2003 Mobius LSV Gravity Games
Total Noob running 1100 in the center, 750s in the lockers.
JL JX360/4 powering 6 Infinity 621m speakers
-
07-02-2018, 01:11 PM #8
The surf and Wakeboard tines just bolted directly to the Supra plate that came on the boat. There was already a swivel mount there also. I am guessing you don’t have either of those. However you can buy the universal mount, swivel, and then the surf caddy to mount on your tower. This picture might be better. And below is the link to their website.
https://www.roswellmarine.com/produc...s/board-racks/
Sent from my iPhone using Tapatalk
2018 Moomba Craz
6.2L Raptor 400
6 Pump Ballast, Autowake 2.0, Flow 2.0 Surf System
OJ 15x13 Wake Prop
Digital Cruise Pro 3 (paddle wheel)
Wetsounds Rev 10's
2005 Supra Launch 22SSV - Sold
-
07-02-2018, 01:17 PM #9
Thanks.. I will take a look at those and see if I want to spend the money
2003 Mobius LSV Gravity Games
Total Noob running 1100 in the center, 750s in the lockers.
JL JX360/4 powering 6 Infinity 621m speakers
-
07-02-2018, 02:18 PM #10Senior Member
- Join Date
- May 2016
- Location
- West Milwaukee, WI
- Posts
- 283
If you want to go the cargo bar route, I found more pictures that show them on the bimini... IMG_20170624_123237.jpgIMG_20170624_123214.jpg
Sent from my OnePlus 5 using Tapatalk2004 Mobius LS - hooked on footin'
Former tow: 1986 Chaparral 178 XL, 90hp Merc
First tow: 197x Glasspar Citation, 135hp Merc