Results 1 to 2 of 2

Thread: Trim plate

  1. #1
    Join Date
    Dec 2015
    Location
    Hot Springs Village
    Posts
    1

    Default Trim plate

    Guys Iím having problem with my trim plate. Gauge is slow to rise/lower but the actual hydraulic arm will not raise or lower. Iíve check the fuse and itís okay. Any tips? Thanks in advance. 2012 outback v
    Will Owens
    2012 outback v

  2. #2
    Join Date
    Sep 2005
    Location
    Claytor Lake, VA
    Posts
    449

    Default

    Your boat should have a single Lenco electric actuator. Earlier boats boats had dual Bennett hydraulic actuators.

    If your gauge is changing then it sounds like the motor is running and turning the pot but the ball screw is stripped.
    2005 Mobius LSV
    325 EFI

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •