Results 1 to 2 of 2
Thread: Trim plate
-
06-24-2018, 01:50 PM #1Junior Member
- Join Date
- Dec 2015
- Location
- Hot Springs Village
- Posts
- 1
Trim plate
Guys I’m having problem with my trim plate. Gauge is slow to rise/lower but the actual hydraulic arm will not raise or lower. I’ve check the fuse and it’s okay. Any tips? Thanks in advance. 2012 outback v
Will Owens
2012 outback v
-
07-16-2018, 01:36 PM #2Senior Member
- Join Date
- Sep 2005
- Location
- Claytor Lake, VA
- Posts
- 598
Your boat should have a single Lenco electric actuator. Earlier boats boats had dual Bennett hydraulic actuators.
If your gauge is changing then it sounds like the motor is running and turning the pot but the ball screw is stripped.2005 Mobius LSV
325 EFI