Results 1 to 4 of 4
Thread: Wet sounds rgb controller
-
06-20-2018, 08:16 AM #1
Wet sounds rgb controller
Hi all... ran 15 miles of wire last night for my revo6 rgb lights. Today i will be hooking up the controller. I want to mount it under the helm near the sub. Is there a pig tail stashed anywhere near wited to an acc switch that yall know about? Any tips appreciated!
'08 Mobius LS. Sold
'18 Craz "TypeO"
REV10's, Revo6 xss, Kicker10, Kicker 12 CompR, various LED's
-
06-20-2018, 09:47 AM #2
I tapped directly into the power and ground wires from the courtesy lights switch.
2018 Murder Max
2008 Outback V-Bought new; sold in 2018
-
06-20-2018, 09:50 AM #3
So you want to use a rocker to power on/off the RGB controller? Just wire it fused to the boat side of the main battery switch and use the RGB's remote to turn it on/off if you like. When you put the boat away, turn the battery switch off and controller has not juice along with everything else.
-
06-20-2018, 10:43 AM #4
I think i was over thinking this... Lol. Thanks guys
'08 Mobius LS. Sold
'18 Craz "TypeO"
REV10's, Revo6 xss, Kicker10, Kicker 12 CompR, various LED's