Results 1 to 3 of 3
  1. #1
    Join Date
    Jan 2018
    Location
    Lexington, KY
    Posts
    90

    Default 2018 Fusion RA70N zones

    On the water this weekend I realized that the four cabin speakers in the boat are wired to separate zones, and they're completely non-intuitive. Zone 1 is the left front and right rear, and Zone 2 is the left rear and right front plus Tower speakers. I think the crossover is a mistake, but I would love to have a better division - Like all four cabin speakers on Zone one, and the tower on Zone 2. After looking at the manual for the radio, it doesn't seem like you can get all four channels powered by the head unit on the same zone. Am I interpreting this correctly? Looks like it's time for an amp!

    Does anyone know what these Factory speakers are?
    2018 Moomba Craz | Autowake 2.0, Zero-Off, G6 Pumps | Captain Blue/Dark Graphite/Silver Flake | Enzos + Lead

  2. #2
    Join Date
    Oct 2010
    Location
    Lake Wylie NC Area
    Posts
    1,826

    Default

    If ALL speakers are powered on external amp, you can have 1 zone for tower and 1 zone for in-boats.


    The on-boats area 6.5" Kicker marine OEM speaker.

  3. #3
    Join Date
    Apr 2017
    Location
    Hayden Id
    Posts
    281

    Default

    Interpreted correctly, you need an amp for the in boats, get your amp and may as well get some bow speakers at the same time, then you can do zone 1 cabins and sub , if you have or want, and towers zone 2
    2017 Craz surf auto wake
    1140 # rears wet sounds

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •