Results 1 to 6 of 6
-
06-11-2018, 04:18 PM #1Junior Member
- Join Date
- Jun 2018
- Posts
- 3
04 moomba mobius throttle mechanism issues. HELP!
So the throttle lever drivers side, their is a screw with a black let's call it a plastic bushing,well it broke in half and I've tried using washers but the screw wont stay and the boat bogs down. Would anyone know where I could locate this plastic piece? I'm in Colorado and everybody here wants to sell me a new throttle witch I'm told has to be retro fitted?! Any help here would be appreciated! Thx!
Last edited by Littleblue; 06-11-2018 at 04:29 PM.
-
06-11-2018, 07:27 PM #2
Any photos of the assembly and broken piece?
1998 Mobius
310 HP PCM
SOLD
-
06-11-2018, 09:02 PM #3Junior Member
- Join Date
- Jun 2018
- Posts
- 3
20180608_153311.jpg20180608_150422.jpg In clamp is the plastic peace that broke, I tried to JB wield it together. Its about an inch long. Other pick is my attempt to fix it with washers.
-
06-12-2018, 01:45 PM #4Senior Member
- Join Date
- May 2016
- Location
- West Milwaukee, WI
- Posts
- 283
If it helps any, I believe that's a Teleflex CH2200 shifter. That button is spring loaded and needs to be able to lock out the shifter so that only throttle can be applied (in engine warmup situations).
2004 Mobius LS - hooked on footin'
Former tow: 1986 Chaparral 178 XL, 90hp Merc
First tow: 197x Glasspar Citation, 135hp Merc
-
06-12-2018, 03:24 PM #5
I'd be tempted to call these guys and see if they have parts or a rebuild kit for one of these:
https://greatlakesskipper.com/telefl...ver-ch2200-kitMy Mom said I'm not allowed to get wet!
2008 LSV (sold)
2000 Outback LS (sold)
LLTR!!!!!!!!
-
06-12-2018, 03:31 PM #6Senior Member
- Join Date
- May 2016
- Location
- West Milwaukee, WI
- Posts
- 283
You might get lucky with this:
https://www.seatechmarineproducts.co...0-0220913.html2004 Mobius LS - hooked on footin'
Former tow: 1986 Chaparral 178 XL, 90hp Merc
First tow: 197x Glasspar Citation, 135hp Merc