Results 1 to 4 of 4
  1. #1
    Join Date
    May 2017
    Posts
    108

    Default Floor panel removal 06 LSV

    Hi, trying to take the floor panels out and can't find the fastener head or type? Any info appreciated.
    2006 Mobius LSV
    New to boating and surfing

  2. #2
    Join Date
    May 2010
    Location
    Salt Lake City, Utah
    Posts
    971

    Default

    not sure if the 06 is like the 07 but i would think it is. In my 07 LSV there are two metal panels that sit on top of the gas tank and each panel has 4 screws. They can be hard to find because the carpet gets matted down over the screw heads and it doesn't even look like they are there. The first time i took my panels off it took a while to find one or two of them. It just took some time and patience. Try using a magnet if you need. On the rear panel mine are in corners more or less. Same for the front panel but one of them ( the one closest to the drivers seat) is probably 6 inches or so down from the corner. If you can't find them i can take a picture for you.
    Scott
    2007 Mobius LSV with a lot of great upgrades and mods

  3. #3
    Join Date
    May 2017
    Posts
    108

    Default

    Quote Originally Posted by 996scott View Post
    not sure if the 06 is like the 07 but i would think it is. In my 07 LSV there are two metal panels that sit on top of the gas tank and each panel has 4 screws. They can be hard to find because the carpet gets matted down over the screw heads and it doesn't even look like they are there. The first time i took my panels off it took a while to find one or two of them. It just took some time and patience. Try using a magnet if you need. On the rear panel mine are in corners more or less. Same for the front panel but one of them ( the one closest to the drivers seat) is probably 6 inches or so down from the corner. If you can't find them i can take a picture for you.
    Thanks for the reply.

    I had found the holes in the corners but could not locate the fasteners under the panels, turns out there were none, they were just sitting there nice and snug.
    2006 Mobius LSV
    New to boating and surfing

  4. #4
    Join Date
    May 2010
    Location
    Salt Lake City, Utah
    Posts
    971

    Default

    yea, no fasteners. I actually have left the screws out because they fit so snug and i have had to pull them up from time to time. Makes it a lot easier without dealing with the screws.
    Scott
    2007 Mobius LSV with a lot of great upgrades and mods

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •