Murder Max Mods

[Prospersigman]

Was there a tower between this one and the newest? Could be possible ....


Sent from my SM-G928V using Tapatalk

I was going to say...didn't Dusty's SE have 410's on it??

[Broke Pilot]

I don’t know that I could fit them on the ‘17 SA. The new ‘18’s with power tower are really square compared to mine. You could definitely fit one or two on a newer one.
I’d thought about maybe doing the Threesome with the Rev10s mounted on the speaker pads, just dunno how it’d look with that 410 hanging off the tower.

[larry_arizona]

I ordered my SA with 2 8.8’s

I may upgrade and add 2 more 8.8’s but I think my amp is a 600/6.

Would I need a separate amp to drive 2 more 8.8’s? I could always add 2 Rev10’s


Sent from my iPhone using Tapatalk

[dusty2221]

Was there a tower between this one and the newest? Could be possible ....


Sent from my SM-G928V using Tapatalk

I was going to say...didn't Dusty's SE have 410's on it??

I don’t know that I could fit them on the ‘17 SA. The new ‘18’s with power tower are really square compared to mine. You could definitely fit one or two on a newer one.
I’d thought about maybe doing the Threesome with the Rev10s mounted on the speaker pads, just dunno how it’d look with that 410 hanging off the tower.

What was the problem?

[Broke Pilot]

Of course you’d have to chime in... lmao
Dang that looks good. I dunno how I missed that when you had it. I guess the towers are the same. Did you have to do anything special with the outer clamps? In that picture ^^ it looks like you’re only using the inner! Lol
We’re you able to reroute the factory speaker wire to them or did you re-string the tower?

[dusty2221]

Nothing about it was bolt on. I mocked up all my own brackets out of wood for fitment and then had the machine shop make them. Inner mount was the basic RGB swivel clamp, outer used the swivel base and pod without a clamp, I fabbed a mount that bolted directly to the stock outer top speaker plate in the tower and the wires ran thru the oem location.

They would have bolted up to the bar IIRC, but they would have been crooked as hell, no way I could live with that

[Broke Pilot]

That’s what I was afraid of... kinda why I was thinking Threesome with the 10’s mounted on the outer lower pads

[dusty2221]

I think the tower center is to wide to fit the 410 clamp, the big flat piece connecting the front and rear bar. Nah mean?

[Broke Pilot]

Well you’re just full of disappointments today aren’t you?!? Lmao
But, like I said, I’m pretty pleased with the JL. Until they fry I doubt I’ll change anything.

[Broke Pilot]

OP, I’d pick up an 800/8, you’re gonna want to bridge 4 8.8’s. They want all the power you can give them with the crappy signal you get outta that ICE box.
You could easily sell that 600/6 to cover most of the cost. Heck, I might even buy it.