Results 191 to 200 of 268
Thread: Murder Max Mods
-
04-30-2020, 01:26 PM #191
I can’t take any credit for that as a few others here have already done it, once I showed my wife a picture of one she said “yep”.
I didn’t drill through it. I just used some 1” stainless steel screws from the bottom and put some marine sealant/adhesive on the threads to hopefully keep them in there. Seems like that has worked for others.2018 Murder Max
2008 Outback V-Bought new; sold in 2018
-
05-09-2020, 10:46 AM #192
Not a boat mod but my wife had this made for the boat dock:
2018 Murder Max
2008 Outback V-Bought new; sold in 2018
-
05-16-2020, 10:37 AM #193
Hey MM, been looking at the taco marine and found these:
https://www.boatoutfitters.com/stain...der-lock-cleat.
Question, how big is the threaded portion on the one's you installed?. This one requires a gaping 3/4" hole to be drilled into the hull. Is that correct? Did u install a different size? I mean, I'm ok if that is what it is, just want to make sure before I commit. Seems like a pretty big hole. And the receiver base measures 1.5". That's pretty big. My buddy has phender pro's in his MC and I don't remember them being that big.2020 Supra SL 400
2015 Moomba Mojo(Sold)
2018 Yamaha Waverunner(Just to fool around)
2018 F150 Lariat
sport edition, 3.5lt ecoboost
-
05-16-2020, 04:57 PM #194
-
05-17-2020, 09:35 AM #195
For anyone interested, I found these quick release fender holders. They are a little smaller but also require a smaller hole drilled into the hull. Hole size is 5/8" vs 3/4". The base is 1" vs 1.5 " on the TACO. You could drill these with a 5/8" drill bit, prolly harder to chip gel coat with a bit over a hole saw, I think.
A little cheaper too.
Has anyone seen these or purchased from this site. It seems legit.Found it on google search, and we all know how anything on google has to be 100% legit!
https://www.cpperformance.com/p-7398...SAFEgLeLvD_BwELast edited by Isaguel; 05-17-2020 at 09:38 AM.
2020 Supra SL 400
2015 Moomba Mojo(Sold)
2018 Yamaha Waverunner(Just to fool around)
2018 F150 Lariat
sport edition, 3.5lt ecoboost
-
10-28-2020, 08:30 AM #196
Now that the boat is home for the winter it’s time for a good detail, so I procrastinated a bit and cut the tabs off the engine tray for easier removal as seen on some of the new boats:
I used this pic someone posted on the forum for reference:
2018 Murder Max
2008 Outback V-Bought new; sold in 2018
-
10-28-2020, 08:44 AM #197
That's a great idea, now you don't have to pop out the struts to remove the storage bins.
I should do that with my over-engine tray.
Well done sir!
Sent from my Note 9 using Tapatalk2017 Moomba Craz Surf Edition
Flow 2.0 Surf System w/ AutoWake™
5,600 Lbs Ballast - Enzos + Lead + Sumo
Wet Sounds REV10s + REVO12-XXX
-
10-28-2020, 11:35 AM #198
Thanks, dealing with the struts was a hassle. Hopefully now I’ll be more likely to check the oil regularly lol.
2018 Murder Max
2008 Outback V-Bought new; sold in 2018
-
10-29-2020, 08:18 AM #199Senior Member
- Join Date
- Aug 2017
- Posts
- 1,382
-
10-29-2020, 10:05 AM #200
Dang, not on my 2021 Craz it isn't. Guess i will be modifying my tray this weekend. it is a pain to get out as it is.
Scott
2021 Craz
2007 Mobius LSV
1997 Sea Ray 190