Page 16 of 27 FirstFirst ... 6141516171826 ... LastLast
Results 151 to 160 of 268

Thread: Murder Max Mods

  1. #151
    Join Date
    Apr 2012
    Location
    Wake Forest, NC
    Posts
    875

    Default

    Quote Originally Posted by trayson View Post
    Like I said it's functional and cheap. it'll get ya by. I've got a pile of leftover stainless cupholders. Hit me up before you buy any! LOL.
    Will do, thank you!!!
    2018 Murder Max
    2008 Outback V-Bought new; sold in 2018

  2. #152
    Join Date
    Feb 2018
    Location
    Boating on Lake Martin, AL
    Posts
    1,523

    Default

    Where would you even add permanent cup holders to a Max in the bow if using the cushion? The entire bow is upholstered with no flat fiberglass surfaces other than the gunnels. I kind of wished they added them to the front of the filler cushion basically in the same place as the cup holders they cover up.
    2019 Moomba Max "MOOMBAE"
    Mods: Wakemakers upgrade + 500 lbs of lead
    2016 Yamaha AR192 - sold

  3. #153
    Join Date
    May 2014
    Location
    Palm Desert, CA
    Posts
    1,541

    Default

    Get 4 cup holders from Trayson & mount them here....


    Sent from my iPhone using Tapatalk
    2015 Mondo

    Upgraded 900lb Rears, 250lb under Port Seat & 750lb IBS

    2079 Prop

    Auto Flow 2.0

    Kicker Stereo: 2 800.5 amps, 2 400.2 amps, 4 KM8 towers , 4 KM10 subs & 8 KM6 cabin speakers

  4. #154
    Join Date
    May 2013
    Location
    Vancouver WA
    Posts
    5,019

    Default

    The blue arrows is where I was thinking. Don't know if there's space at the red arrows but definitely worth considering too
    2008 Moomba Mobius XLV. Monster Cargo Bimini, WS Rev 410's, Polk Cabins, 3 Infinity Subs, PPI amps, WS420, Exile BT, upgraded ballast pumps, up to 3,500+ pounds of ballast, Blue LED's...
    1992 Supra Sunsport. **SOLD** 2k pounds ballast, Surf System, Blue LED's everywhere, decent audio system.
    Tow Rig: 2013 F150 Ecoboost FX4 (wife's rig) Other money pits include:1998 BMW M3 Cabriolet, 2009 Audic A6 Avant 3.0T, 2005 Kawasaki ZX-6R 636.
    www.TraysonsToybox.com

  5. #155
    Join Date
    May 2018
    Location
    Calgary, AB, Canada
    Posts
    21

    Default

    Quote Originally Posted by z28ke View Post
    Here’s what a lot of folks have expressed interest in - adding hinges to the bulky side bench seats on the max.

    Keep in mind I am adding ballast under these seats so I don’t need access to the bottom of the compartment. If I was using it for storage I would use a different type of hinge so the seat goes up and back instead of forward and down.

    Note: This is a temporary test run to see if they will work. I only put 2 screws in the seat bottom and used double sided sticky tape on the seat base. I’ll go back and add more screws to the seat and drill out the base and use machine screws with washers and nylon lock nuts when I have more time.







    A link to the hinges:

    https://www.greatlakesskipper.com/lu...SABEgIWwPD_BwE


    This solution looks great! Any idea where I would find up and back hinges and what those would look like?

    Thanks

    John
    2018 Moomba Max

  6. #156
    Join Date
    Apr 2012
    Location
    Wake Forest, NC
    Posts
    875

    Default

    Quote Originally Posted by [email protected] View Post
    This solution looks great! Any idea where I would find up and back hinges and what those would look like?

    Thanks

    John
    These are the type of hinge:

    Sea-Doo New OEM Sport Boat Seat Hinge Bracket Set 230 Challenger, SP, Wake https://www.amazon.com/dp/B01GVT3K4G..._SanqDb7AB02P4

    But there is one major problem.... there is no cross support to mount the rearward hinge to on the max. Only solution would be to build one from hdpe.
    2018 Murder Max
    2008 Outback V-Bought new; sold in 2018

  7. #157
    Join Date
    Feb 2018
    Location
    Boating on Lake Martin, AL
    Posts
    1,523

    Default

    Thinking about adding RGB lighting to my Max in the off season. What controller do you guys recommend or should I just buy a roll of RGB LEDs from Amazon that come with their own controller?
    2019 Moomba Max "MOOMBAE"
    Mods: Wakemakers upgrade + 500 lbs of lead
    2016 Yamaha AR192 - sold

  8. #158
    Join Date
    Apr 2012
    Location
    Wake Forest, NC
    Posts
    875

    Default

    I used the wetsounds music controller, but I’m sure the others will work fine too.
    2018 Murder Max
    2008 Outback V-Bought new; sold in 2018

  9. #159
    Join Date
    May 2018
    Location
    Waynesville, Ohio
    Posts
    481

    Default

    I took a queue from you and lit up my speakers. Good tip on the led lights. The best part is the boat was pre-wired for them, so the install was super easy.




    Sent from my iPhone using Tapatalk

    2018 Moomba Craz
    6.2L Raptor 400
    6 Pump Ballast, Autowake 2.0, Flow 2.0 Surf System
    OJ 15x13 Wake Prop
    Digital Cruise Pro 3 (paddle wheel)
    Wetsounds Rev 10's

    2005 Supra Launch 22SSV - Sold

  10. #160
    Join Date
    Nov 2019
    Location
    Copenhagen
    Posts
    1

    Default

    Awesome inspiring mods to those interiors of those boats. I will probably use them myself!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •