Page 10 of 27 FirstFirst ... 8910111220 ... LastLast
Results 91 to 100 of 268

Thread: Murder Max Mods

  1. #91
    Join Date
    Apr 2013
    Location
    Knoxville TN
    Posts
    3,065

    Default

    [QUOTE=z28ke;336084]My wife got me this rgb underwater led for Christmas and I got around to installing it today. Had to take the grinder to it as others on this forum have done to clear the wakeplate.



    /QUOTE]

    What lights are those?

    Sent from my P00I using Tapatalk
    2018 Supra SL400

  2. #92
    Join Date
    Apr 2012
    Location
    Wake Forest, NC
    Posts
    875

    Default

    It’s the Titan-2 (in rgb) from boatpluglight.com

    https://boatpluglight.myshopify.com/...nt=41350053635
    2018 Murder Max
    2008 Outback V-Bought new; sold in 2018

  3. #93
    Join Date
    May 2018
    Location
    Waynesville, Ohio
    Posts
    481

    Default

    Quote Originally Posted by z28ke View Post
    It’s the Titan-2 (in rgb) from boatpluglight.com

    https://boatpluglight.myshopify.com/...nt=41350053635
    Did you check to see if the oil drain hose still fits though the hole? Is it a standard drain plug? I would like to get one of those assuming the oil drain still works.


    Sent from my iPhone using Tapatalk

    2018 Moomba Craz
    6.2L Raptor 400
    6 Pump Ballast, Autowake 2.0, Flow 2.0 Surf System
    OJ 15x13 Wake Prop
    Digital Cruise Pro 3 (paddle wheel)
    Wetsounds Rev 10's

    2005 Supra Launch 22SSV - Sold

  4. #94
    Join Date
    Apr 2012
    Location
    Wake Forest, NC
    Posts
    875

    Default

    I doubt it’ll go through since the wires come out of the backside of the drain hole. I always change fluids top side with an oil extractor so it’s no worry for me.

    You can kinda see what I mean in this pic from the side

    2018 Murder Max
    2008 Outback V-Bought new; sold in 2018

  5. #95
    Join Date
    May 2018
    Posts
    4,920

    Default

    That is a cool gadget and smart engineering solution if you didn’t get the factory underwater lighting.




    Sent from my iPhone using Tapatalk
    2021 Supra SA 400
    2018 Supra SA 400 (SOLD)
    Michigan

  6. #96
    Join Date
    Apr 2012
    Location
    Wake Forest, NC
    Posts
    875

    Default

    Here’s what a lot of folks have expressed interest in - adding hinges to the bulky side bench seats on the max.

    Keep in mind I am adding ballast under these seats so I don’t need access to the bottom of the compartment. If I was using it for storage I would use a different type of hinge so the seat goes up and back instead of forward and down.

    Note: This is a temporary test run to see if they will work. I only put 2 screws in the seat bottom and used double sided sticky tape on the seat base. I’ll go back and add more screws to the seat and drill out the base and use machine screws with washers and nylon lock nuts when I have more time.







    A link to the hinges:

    https://www.greatlakesskipper.com/lu...SABEgIWwPD_BwE
    2018 Murder Max
    2008 Outback V-Bought new; sold in 2018

  7. #97
    Join Date
    Jul 2011
    Location
    Murrieta, CA
    Posts
    1,590

    Default

    Quote Originally Posted by z28ke View Post
    Here’s what a lot of folks have expressed interest in - adding hinges to the bulky side bench seats on the max.

    Keep in mind I am adding ballast under these seats so I don’t need access to the bottom of the compartment. If I was using it for storage I would use a different type of hinge so the seat goes up and back instead of forward and down.

    Note: This is a temporary test run to see if they will work. I only put 2 screws in the seat bottom and used double sided sticky tape on the seat base. I’ll go back and add more screws to the seat and drill out the base and use machine screws with washers and nylon lock nuts when I have more time.







    A link to the hinges:

    https://www.greatlakesskipper.com/lu...SABEgIWwPD_BwE
    That looks like a nice solution. In travel with boards in that storage area but I think it would still be easy to get them in and out. Hmmmm, I may have to order a set.


    Sent from my iPhone using Tapatalk
    2018 Max with a little extra weight here and there

  8. #98
    Join Date
    Apr 2012
    Location
    Wake Forest, NC
    Posts
    875

    Default

    My wife and in-laws got me the wakemakers 720lb bags for my birthday a couple weeks ago and I just finished the install:



    Used a 2 1/4” hole saw to drill through the stringers. The ports on the wakemakers bags are a little further apart than the front ports on the stock rear bags so the holes are offset slightly.



    I ordered 8 of these to go over the holes:

    https://www.ebay.com/itm/Rig-Rite-Ma...pid=1022100282

    2018 Murder Max
    2008 Outback V-Bought new; sold in 2018

  9. #99
    Join Date
    Apr 2012
    Location
    Wake Forest, NC
    Posts
    875

    Default

    On to the vent/overflow...



    Green: goes to the vent on the top of the 720
    Red: attach the stock vent hose here from the rear bag
    Blue: attaches to the vent thru Hull barb





    I’m considering Ting into the 720 vent and using 2 fittings on top of the bag like the factory does on the rear bags.

    Note: This has not been water tested yet but seems like it’ll work fine based on what others have done.
    2018 Murder Max
    2008 Outback V-Bought new; sold in 2018

  10. #100
    Join Date
    Apr 2012
    Location
    Wake Forest, NC
    Posts
    875

    Default Murder Max Mods

    Complete parts list from wakemakers to do it this way (including the crimping tool and a couple extra clamp bands, I think 20ft of hose is enough- I used some extra I had from upgrading my old outbackV a few years ago):









    With the 10% off moomba discount this comes in at under $600 not including the rig rite grommets which are optional of course.

    I can’t wait to try it out, bring on summer!!!
    Last edited by z28ke; 02-03-2019 at 01:56 PM.
    2018 Murder Max
    2008 Outback V-Bought new; sold in 2018

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •