Murder Max Mods

[larry_arizona]

Sounds like the audio package I ordered has the 800/8 and might even be factory wired for adding 2 more 8.8s


Sent from my iPhone using Tapatalk

[Broke Pilot]

I’d imagine the wires are there. I think most of these boats use a pre-made wiring harness

[larry_arizona]

Then the only decision will be adding 2 REV10’s or 2 8.8’s


Sent from my iPhone using Tapatalk

[larry_arizona]

Is the JL 8.8’s being discontinued? Inventory seems low out there are JLaudio does not list them on their website.

Lots of 7.7’s

Edit: confirmed discontinued


Sent from my iPhone using Tapatalk

[trayson]

Then the only decision will be adding 2 REV10’s or 2 8.8’s


Sent from my iPhone using Tapatalk

most would discourage you from mixing coaxial with HLCD speakers on your towers. They are meant to be played at different distances and IMO the REV10's would overpower the 8.8's. But who knows, maybe it'd get you a near/far mix??? I'm sure others might chime in.

[larry_arizona]

most would discourage you from mixing coaxial with HLCD speakers on your towers. They are meant to be played at different distances and IMO the REV10's would overpower the 8.8's. But who knows, maybe it'd get you a near/far mix??? I'm sure others might chime in.

Great feedback, thank you.


Sent from my iPhone using Tapatalk

[Edo88]

So I finished up the stereo install over the weekend pulling some late nights so I could take the boat out last Sunday. Everything worked..... except a major air leak from were the sub box meets the helm wall on the bottom edge. It sounded terrible!

Remember I said I should have cut the hole for the sub a little lower....the box not being able to be pushed upwards enough was keeping it from sealing at the bottom.

To fix I ordered one of these: Atrend Universal MDF Constructed Spacer for 12 Inch Sub Boxes- Adds 3/4" to Decrease Woofer Depth https://www.amazon.com/dp/B0013NWD12..._CMegBbEX0EYEH

and cut a little bit off the top of it so it would make a perfect circle with the hole I cut. Then I drilled 8 small holes and counter sunk 4 short screws in to hold this to the wall, and 4 long screws going through the ring and into the box to hold it in place. Before I had the sub mounting screws going through the helm wall and into the box. Put some silicone around all seams for good measure.

Ignore the god awful hack job hole I cut, thank god it’s hidden lol.





Other than that this thing bumps hard! This system is crazy loud, I couldn’t be happier.

And good lord those rev10s scream with 300watts per speaker!!!



Going up to the in laws lake house this weekend so I’m hoping to finish up round 1 of the rgb LED install tonight or tomorrow night.

Off topic question here but how tall is your garage door. I’m having a shop built here soon and need to make sure it’ll clear the tower.


Sent from my iPhone using Tapatalk

[dusty2221]

Off topic question here but how tall is your garage door. I’m having a shop built here soon and need to make sure it’ll clear the tower.


Sent from my iPhone using Tapatalk

You are gonna want a 12ft door

[Broke Pilot]

Discontinued?
http://www.jlaudio.com/m880-etxv3-sg...-systems-91195

[Edo88]

You are gonna want a 12ft door

We’ll shoot. Thanks


Sent from my iPhone using Tapatalk