Page 20 of 21 FirstFirst ... 1018192021 LastLast
Results 191 to 200 of 209

Thread: Murder Max Mods

  1. #191
    Join Date
    Apr 2012
    Location
    Wake Forest, NC
    Posts
    810

    Default

    Quote Originally Posted by Branden967 View Post
    I love the ladder idea! Did you have to recess the bolts or nuts on the top side to have the gator step lay flat? It looks really good!
    I canít take any credit for that as a few others here have already done it, once I showed my wife a picture of one she said ďyepĒ.

    I didnít drill through it. I just used some 1Ē stainless steel screws from the bottom and put some marine sealant/adhesive on the threads to hopefully keep them in there. Seems like that has worked for others.
    2018 Murder Max
    2008 Outback V-Bought new; sold in 2018

  2. #192
    Join Date
    Apr 2012
    Location
    Wake Forest, NC
    Posts
    810

    Default

    Not a boat mod but my wife had this made for the boat dock:

    2018 Murder Max
    2008 Outback V-Bought new; sold in 2018

  3. #193
    Join Date
    Aug 2015
    Location
    Mn
    Posts
    545

    Default

    Quote Originally Posted by z28ke View Post
    Been working on the boat again lately!

    Installed 4 taco marine fender holders:

    Hey MM, been looking at the taco marine and found these:

    https://www.boatoutfitters.com/stain...der-lock-cleat.

    Question, how big is the threaded portion on the one's you installed?. This one requires a gaping 3/4" hole to be drilled into the hull. Is that correct? Did u install a different size? I mean, I'm ok if that is what it is, just want to make sure before I commit. Seems like a pretty big hole. And the receiver base measures 1.5". That's pretty big. My buddy has phender pro's in his MC and I don't remember them being that big.
    2020 Supra SL 400
    2015 Moomba Mojo(Sold)
    2018 Yamaha Waverunner(Just to fool around)
    2018 F150 Lariat
    sport edition, 3.5lt ecoboost

  4. #194
    Join Date
    Apr 2012
    Location
    Wake Forest, NC
    Posts
    810

    Default

    Quote Originally Posted by Isaguel View Post
    Hey MM, been looking at the taco marine and found these:

    https://www.boatoutfitters.com/stain...der-lock-cleat.

    Question, how big is the threaded portion on the one's you installed?. This one requires a gaping 3/4" hole to be drilled into the hull. Is that correct? Did u install a different size? I mean, I'm ok if that is what it is, just want to make sure before I commit. Seems like a pretty big hole. And the receiver base measures 1.5". That's pretty big. My buddy has phender pro's in his MC and I don't remember them being that big.
    Yea Iím pretty sure I used a 3/4Ē hole saw so Iím sure thatís it.
    2018 Murder Max
    2008 Outback V-Bought new; sold in 2018

  5. #195
    Join Date
    Aug 2015
    Location
    Mn
    Posts
    545

    Default

    For anyone interested, I found these quick release fender holders. They are a little smaller but also require a smaller hole drilled into the hull. Hole size is 5/8" vs 3/4". The base is 1" vs 1.5 " on the TACO. You could drill these with a 5/8" drill bit, prolly harder to chip gel coat with a bit over a hole saw, I think.
    A little cheaper too.
    Has anyone seen these or purchased from this site. It seems legit.Found it on google search, and we all know how anything on google has to be 100% legit!

    https://www.cpperformance.com/p-7398...SAFEgLeLvD_BwE
    Last edited by Isaguel; 05-17-2020 at 09:38 AM.
    2020 Supra SL 400
    2015 Moomba Mojo(Sold)
    2018 Yamaha Waverunner(Just to fool around)
    2018 F150 Lariat
    sport edition, 3.5lt ecoboost

  6. #196
    Join Date
    Apr 2012
    Location
    Wake Forest, NC
    Posts
    810

    Default

    Now that the boat is home for the winter itís time for a good detail, so I procrastinated a bit and cut the tabs off the engine tray for easier removal as seen on some of the new boats:







    I used this pic someone posted on the forum for reference:

    2018 Murder Max
    2008 Outback V-Bought new; sold in 2018

  7. #197
    Join Date
    Jan 2017
    Location
    Katy, TX
    Posts
    1,320

    Default

    That's a great idea, now you don't have to pop out the struts to remove the storage bins.

    I should do that with my over-engine tray.

    Well done sir!

    Sent from my Note 9 using Tapatalk
    2017 Moomba Craz Surf Edition
    Flow 2.0 Surf System w/ AutoWakeô
    5,600 Lbs Ballast - Enzos + Lead + Sumo
    Wet Sounds REV10s + REVO12-XXX

  8. #198
    Join Date
    Apr 2012
    Location
    Wake Forest, NC
    Posts
    810

    Default

    Thanks, dealing with the struts was a hassle. Hopefully now Iíll be more likely to check the oil regularly lol.
    2018 Murder Max
    2008 Outback V-Bought new; sold in 2018

  9. #199
    Join Date
    Aug 2017
    Posts
    1,340

    Default

    Quote Originally Posted by RC_Hinojosa View Post
    That's a great idea, now you don't have to pop out the struts to remove the storage bins.

    I should do that with my over-engine tray.

    Well done sir!

    Sent from my Note 9 using Tapatalk
    The 2021s are cut already, itís brilliant! I was pleasantly surprised.


    Sent from my iPhone using Tapatalk

  10. #200
    Join Date
    May 2010
    Location
    Salt Lake City, Utah
    Posts
    1,325

    Default

    Dang, not on my 2021 Craz it isn't. Guess i will be modifying my tray this weekend. it is a pain to get out as it is.
    Scott
    2007 Mobius LSV with a lot of great upgrades and mods. Gone
    2021 Craz

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •