![Moomba on Facebook Moomba on Facebook](/assets/images/chicklet_facebook.gif)
![Moomba on Twitter Moomba on Twitter](/assets/images/chicklet_twitters.gif)
![Moomba on Vimeo Moomba on Vimeo](/assets/images/chicklet_vimeo.gif)
![Moomba on Instagram Moomba on Instagram](/assets/images/chicklet_instagram.gif)
![Moomba on Blogger Moomba on Blogger](/assets/images/chicklet_blogger.gif)
Interesting response from SC. I’m having very similar issues with my 2013 mojo and I can assure you I’m not putting it up wet or leaving it exposed to unnecessary sun.
2013 Mojo
Definitely not sun. My boat is always in it’s house. Wet, yes. I use my boat a lot so after skiing etc the cushions are going to be wet, even if you dry the surface. How can you say putting a Boat away after use is owner fault? What can a reasonable person do to dry a boats interior after use?
Sent from my iPhone using Tapatalk
2014 Moomba Monda, 5.7 L
1996 VIP Vision 183 / Mercruiser 3.0LX (retired)
Primary interest Freestyle Slalom, Vintage skis
http://www.instgram.com/jlyons30
2002 Moomba Mobius LSV - Sold
2006 Moomba Mobius LSV - Sold
2017 Moomba Craz - Enzos, Lead
I've been doing a little research, talking to Moomba and Spradling(makes the vinyl) and online. Spradling told me to use dawn and water to clean the seats or an approved vinyl cleaner and then a vinyl protectant. We discussed 303 products, cleaner and protectant which are both approved by them.
I found that anything that has silicone or petroleum products are going to eat away the outer layer of the seats, including sun tan oils/sunscreens. I also found something about foot traffic being a major contributing factor to what we are seeing. On my boat the cracking is most severe in the back 3 cushions where people climb in the boat. I have some light cracking on the cushions below the board racks, where people stand to get boards. The sundeck, bow cushions captains chair, passenger's chair and all backs still look great. Not sure how minimize foot traffic into the boat, maybe remove that middle cushion and use that path. Maybe not even boat with the middle cushion anymore. And we will come up with another way to get boards in an out of the racks.
Anyone have any input on the foot traffic thing, I already don't let shoes on the boat, as everyone else does on this forum?
Link to Spradling Resources - they have approved cleaners and some other information.
https://spradlingvinyl.com/resource-library/?=#marine
Gil Hebert
2014 Mojo
http://www.instgram.com/jlyons30
2002 Moomba Mobius LSV - Sold
2006 Moomba Mobius LSV - Sold
2017 Moomba Craz - Enzos, Lead
2014 Moomba Monda, 5.7 L
1996 VIP Vision 183 / Mercruiser 3.0LX (retired)
Primary interest Freestyle Slalom, Vintage skis
We walk on them, just don't stand around on them. You may want to watch how you use that area. I haven't had issues with spradling, I've redone several boats with it. My used 2017 Craz was a rental boat with 500hrs and was left in the sun all season with lots of foot traffic so I know it's not the vinyl. With my crew they're usually pretty tired so we kinda roll into the boat. You may be jumping down or standing around on those seats while changing riders.
http://www.instgram.com/jlyons30
2002 Moomba Mobius LSV - Sold
2006 Moomba Mobius LSV - Sold
2017 Moomba Craz - Enzos, Lead