Results 11 to 20 of 93
Thread: 2018 Moomba Craz wave help
-
05-22-2018, 12:28 PM #11
My Enzo's fit perfectly and fill all the way without pushing up seat cushions. Yes, you will lose all under seat storage but you can still throw a few jackets on top of the bags on each side. What it comes down to for me is being creative with space in the observer compartment for some of my gear.
I do not have the heater so that's something I don't have to contend with.2017 Moomba Craz Surf Edition
Flow 2.0 Surf System w/ AutoWake™
5,600 Lbs Ballast - Enzos + Lead + Sumo
Wet Sounds REV10s + REVO12-XXX
-
05-22-2018, 12:37 PM #12Senior Member
- Join Date
- Jan 2018
- Location
- Lexington, KY
- Posts
- 369
So, the length is OK and there isn't a bunch of unused bag wadded up in the front of the seat compartment? This sounds ideal!
2018 Moomba Craz | Autowake 2.0, Zero-Off, G6 Pumps | Captain Blue/Dark Graphite/Silver Flake | Enzos + Lead
-
05-22-2018, 01:23 PM #13Senior Member
- Join Date
- Aug 2011
- Posts
- 2,522
The enzos fit perfect, the heater is in the way, but only for 12in or so. I plan on using a crate on the otherside to balance out and have some storage.
Fatsac.com sells the enzo direct for $390,just have to email them.http://www.instgram.com/jlyons30
2002 Moomba Mobius LSV - Sold
2006 Moomba Mobius LSV - Sold
2017 Moomba Craz - Enzos, Lead
-
05-22-2018, 01:38 PM #14
-
05-22-2018, 01:42 PM #152017 Moomba Craz Surf Edition
Flow 2.0 Surf System w/ AutoWake™
5,600 Lbs Ballast - Enzos + Lead + Sumo
Wet Sounds REV10s + REVO12-XXX
-
05-22-2018, 01:43 PM #16
-
05-22-2018, 01:51 PM #17Senior Member
- Join Date
- Jan 2018
- Location
- Lexington, KY
- Posts
- 369
my '18 has a box around the heater that looks like it'll do just fine. I've been in a '16 Mojo that didn't have the box, so it must be a somewhat new addition.
2018 Moomba Craz | Autowake 2.0, Zero-Off, G6 Pumps | Captain Blue/Dark Graphite/Silver Flake | Enzos + Lead
-
05-22-2018, 01:54 PM #18Senior Member
- Join Date
- Aug 2011
- Posts
- 2,522
Hasn't bothered the heater, my heater has a plastic bulkhead around it. The bag just doesn't fill that part. My only concern is the other side has more lbs so have to take that into account.
http://www.instgram.com/jlyons30
2002 Moomba Mobius LSV - Sold
2006 Moomba Mobius LSV - Sold
2017 Moomba Craz - Enzos, Lead
-
05-22-2018, 04:57 PM #19
This forum is awsome, I have only been on here for a week. Thanks for all of the help. How much of difference does the prop make to the wake and perfomance? does it change the handeling at all or getting it on to the trailer? Did you guys self install it?
-
05-22-2018, 05:33 PM #20
Lower pitch means better hole shot.
Let me just start out by saying that you should not be power loading your boat onto your trailer, ever! So the prop that you have/use should not even be an issue. I have never ever had to use power to get on my trailer. The key is have the trailer deep enough where you can basically coast up to the front roller. If you are having to mash the gas to get it up on there you are not deep enough with your trailer. Don’t be one of those guys! It’s bad for boat ramps because it washes away the footing and way to easy to screw up and overshoot the trailer and destroy the hull of the boat.
Sent from my iPad using Tapatalk2017 Moomba Craz