Results 91 to 95 of 95
Thread: Supra SL Prop RPMs and GPH
-
08-08-2018, 11:03 PM #91Senior Member
- Join Date
- Aug 2015
- Location
- Spokane, WA
- Posts
- 262
As long as you have 1/2” between the outermost blade tip and the hull you’re good. Just make sure it clears the trailer! It’s pretty easy to raise the rear trailer bunk with a poly spacer though. I would bet there’s room for a 16.25 or 16.50! But a 16 should be plenty!
I’m interested to hear the results!
Sent from my iPhone using Tapatalk Pro2008 Moomba Mobius LSV
-
08-09-2018, 03:49 AM #92Junior Member
- Join Date
- Jul 2018
- Posts
- 19
Yes also really interested in the 16 x12 with 450 test result...
-
08-09-2018, 10:06 AM #93
-
08-13-2018, 01:31 AM #94Member
- Join Date
- Dec 2017
- Location
- Seattle, WA
- Posts
- 34
I finally received my 2775 and spent a few hours with it. I’ve now tried all 3 factory props and this is definitely the right surf prop for my sl450. It knocked about 3-400 off my surf rpms and definitely lower rpms cruising back to the dock. Averaged 6.5 GPH for the first 4 hours and that was with a lot of starts and stops while my ids were working on new trips. Surfing 11.2 mph with 2 in the boat + 900lbs lead and a full tank.
Sent from my iPhone using Tapatalk2018 Supra SL
-
08-13-2018, 10:03 AM #95Member
- Join Date
- Jul 2018
- Location
- Cincy
- Posts
- 42
I ran the OJ950 the rest of the week. And I like it over the 2775. ran 3600-3700 RPM for most of the week. 11.6-12mph. 600 extra lead. 4 adults 3 kids. The 2775 and 950 are very very similar.