Page 7 of 7 FirstFirst ... 567
Results 61 to 69 of 69
  1. #61
    Join Date
    May 2018
    Posts
    5,007

    Default

    6 hours so far, trying to break it in right. Kinda embarrassing to have no boards in the water.




    Sent from my iPhone using Tapatalk
    2021 Supra SA 400
    2018 Supra SA 400 (SOLD)
    Michigan

  2. #62
    Join Date
    Sep 2015
    Location
    Conroe, TX
    Posts
    918

    Default

    It’ll be worth it... trust me. The SA is a monster.
    Overkill is underrated

    2006 Supra 24SSV Gravity Games- traded but never forgotten

    2017 Supra SA 400

  3. #63
    Join Date
    May 2018
    Posts
    5,007

    Default

    Tried a quick auto wake swell surf factory setting today and that wave looks clean.




    Sent from my iPhone using Tapatalk
    2021 Supra SA 400
    2018 Supra SA 400 (SOLD)
    Michigan

  4. #64
    Join Date
    Aug 2015
    Location
    Spokane, WA
    Posts
    262

    Default

    Quote Originally Posted by larry_arizona View Post
    Just wanted to introduce myself and hope I am on the right forum. The Moomba forum looks more active to the newer model Supra’s.

    I am Larry Arizona from Oxford Michigan.

    I am a horsepower junkie and been into GM LS powered for years. It took some convincing to shop a boat with a blue oval engine, but I think I will be ok, lol

    Had boats and jet skis years ago and missed the water.

    After MUCH research, I pulled the trigger on a 2018 Supra SA. Build date is in June and hope to have it in July.

    Just wanted to say Hi and I look forward to learning a lot here.

    1st question... where are all the engine and power upgrades for the 6.2L? Or is modding engines not a wake boat thing?

    Call it a bad habit, but i can’t help but want to install a cam (cams in this case), ported heads etc.....


    Sent from my iPhone using Tapatalk
    Just ran across this thread! My LSV is pre LS, although figured you may be able to offer some advice on L31 modifications. I could care less about HP, more interested in low-end torque. In reality a Turbo Diesel offering would be best power plant for a surf machine.


    Sent from my iPhone using Tapatalk Pro
    2008 Moomba Mobius LSV

  5. #65
    Join Date
    May 2018
    Posts
    5,007

    Default Newb member introduction ordered a Supra SA.

    The L31 5.7L is fairly torquey at 330 ft lbs at 2800 rpm, short of increasing the stroke of the engine to increase torque, I am sure that a torque specific camshaft could be spec’d to increase torque.

    Or

    Throw a supercharger on it!!!!

    I currently have a 2010 Cadillac CTSV with a built LSA 6.2l. Nothing makes torque like a supercharger.

    Car is a 6 speed manual with making 700 hp and 680 ftlbs at the wheels (appx 800hp/775tq at the crank....stock was 560/551)

    Sent from my iPhone using Tapatalk
    Last edited by larry_arizona; 08-17-2018 at 01:37 PM.
    2021 Supra SA 400
    2018 Supra SA 400 (SOLD)
    Michigan

  6. #66
    Join Date
    May 2018
    Posts
    5,007

    Default Newb member introduction ordered a Supra SA.

    Double post by accident
    2021 Supra SA 400
    2018 Supra SA 400 (SOLD)
    Michigan

  7. #67
    Join Date
    Nov 2016
    Location
    Knoxville, TN
    Posts
    1,428

    Default

    Quote Originally Posted by Broke Pilot View Post
    And by the way... that thing is beautiful, but I’m biased anyway lol. That interior is way sharp. Congrats!
    Pm me, I’ve got some cool tricks with the surf system if you put Enzo’s in there!

    What are you able to do with the surf system?
    2018 Supra SA400 aka The Ron Burgandy
    2011 Sea-Doo Wake 155
    2015 Mojo Surf, sold...2013 Axis A22 Recon Edition, sold...2010 Axis A22, sold...2007 Maxum 1800sr3, sold

  8. #68
    Join Date
    May 2018
    Posts
    5,007

    Default Newb member introduction ordered a Supra SA.

    Quote Originally Posted by larry_arizona View Post
    The L31 5.7L is fairly torquey at 330 ft lbs at 2800 rpm, short of increasing the stroke of the engine to increase torque, I am sure that a torque specific camshaft could be spec’d to increase torque.

    Or

    Throw a supercharger on it!!!!

    I currently have a 2010 Cadillac CTSV with a built LSA 6.2l. Nothing makes torque like a supercharger.

    Car is a 6 speed manual with making 700 hp and 680 ftlbs at the wheels (appx 800hp/775tq at the crank....stock was 560/551)

    Sent from my iPhone using Tapatalk
    Look into the Ramjet cam for L31 5.7, will increase torque from idle to 4200 rpm

    https://www.jegs.com/i/Chevrolet-Per...97395/10002/-1


    Sent from my iPhone using Tapatalk
    2021 Supra SA 400
    2018 Supra SA 400 (SOLD)
    Michigan

  9. #69
    Join Date
    May 2018
    Posts
    5,007

    Default

    Quote Originally Posted by larry_arizona View Post
    Look into the Ramjet cam for L31 5.7, will increase torque from idle to 4200 rpm

    https://www.jegs.com/i/Chevrolet-Per...97395/10002/-1


    Sent from my iPhone using Tapatalk
    After some further research, it appears that the L31 marine engine already uses the ramjet 14097395 camshaft. That is a torquey cam.


    Sent from my iPhone using Tapatalk
    2021 Supra SA 400
    2018 Supra SA 400 (SOLD)
    Michigan

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •