Transmission mount bolt

[Dev]

While getting the boat ready this year, I noticed one of the transmission mount bolts was partially hanging out at an angle. I'm afraid I'll strip the threads if I try to wrench it down. Is it possible it's been this way and I've never noticed before? Has this happened to anyone else?


IMG_6665.jpg

[Stazi]

While getting the boat ready this year, I noticed one of the transmission mount bolts was partially hanging out at an angle. I'm afraid I'll strip the threads if I try to wrench it down. Is it possible it's been this way and I've never noticed before? Has this happened to anyone else?


IMG_6665.jpg

Is it threaded into the transmission case or is there a nut on the opposite side?


Sent from my iPhone using Tapatalk

[Dev]

Is it threaded into the transmission case or is there a nut on the opposite side?


Sent from my iPhone using Tapatalk

Hey Stazi -

This is where the trans mount bolts to the boat. Honestly not sure if there's a nut on the other side, or how to gain access to check. I'm adding another image in case it helps.

Thanks
Untitled-4.jpg

[parrothd]

I'm pretty sure that's a wood screw into the stringer. Remove it and see or tighten it.

[Stazi]

I'm pretty sure that's a wood screw into the stringer. Remove it and see or tighten it.

That’s what it looks like to me too.


Sent from my iPhone using Tapatalk

[bsharer]

Ive got one on each transmission mount that looks just like this.

[gmg]

I too, been like that for 6 years.

[bjrow]

Just completed our winterizing last weekend and our 2014 Mondo has exactly the same as shown in your original post.
Tried tightening it up but it wouldn't move. Could have forced it I guess but the way my luck goes with such things I'd probably shear the head off, so I just left it as is. Been like this since 2014 when we purchased the boat. It isn't loose and takes quiet some effort to back it out so I shrugged my shoulders and figured it's a manufacturing thing.
Cheers BruceR, Melb AUS.