1450’s

[c04rsx-sm]

Guess i had the 600 then. My bag was just a cube and had center fill/drain. Didn’t have a “leg” like that...

[RC_Hinojosa]

Guess i had the 600 then. My bag was just a cube and had center fill/drain. Didn’t have a “leg” like that...

Prior to 2018, the 600s were stock and the 900s came with the "Max Surf" package. In 2018 the 900s became the default offering.

Sent from my Note9 using Tapatalk

[Edo88]

Glad you guys brought this back up because I’m going to have to modify my lines as well didn’t realize that the fitting location was a little different


Sent from my iPhone using Tapatalk

[Edo88]

Sent from my iPhone using Tapatalk

[c04rsx-sm]

Sent from my iPhone using Tapatalk

That’s it!! Would have posted a pic but my stock bags are in storage

[Edo88]

Must have been different in 16. Mine were in center from factory. I’m gunna have to move them to get them to corner i guess. I don’t want any stress in the lines or fittings

If you get your lines done before me post what you ended doing and parts list so I can just do the same


Sent from my iPhone using Tapatalk

[c04rsx-sm]

If you get your lines done before me post what you ended doing and parts list so I can just do the same


Sent from my iPhone using Tapatalk

No problem!

[corvette8189]

If you get your lines done before me post what you ended doing and parts list so I can just do the same


Sent from my iPhone using Tapatalk

Just need some hose and a crimp clamp. Pull the short hose off and install a longer hose. You have to heat the hose up and install it on the fitting with the clamp at the same time. A little tricky at first but not difficult.
Got everything from the dealer.

[Edo88]

Just need some hose and a crimp clamp. Pull the short hose off and install a longer hose. You have to heat the hose up and install it on the fitting with the clamp at the same time. A little tricky at first but not difficult.
Got everything from the dealer.

Alright cool thanks. Factory is 1inch hose?


Sent from my iPhone using Tapatalk

[c04rsx-sm]

Alright cool thanks. Factory is 1inch hose?


Sent from my iPhone using Tapatalk

Finished it today.

What i ended up doing is...

Reference the pictures. The stock vent hose has a lot of extra tubing so i cut off about 14 inches and used that to replace the small tube which took the fitting to the motor side connection. And then re clamped the vent line. Pretty easy aside from heating and getting the hose connections done. Which was a pain cramped up in the compartment like that...

Stock hose for center connection


Stock vent line


New connection


New vent line