1450’s

[Edo88]

Seen a lot of people talk about the Enzo, I was wondering is that right bag that everyone goes with? And if I want with this bag would the all the fittings still reach, would it be plug and play or some modification needed Sorry for the noob question I have a 2015 mojo with 1100 bags currently looking to add some weight .


Sent from my iPhone using Tapatalk

[RC_Hinojosa]

In terms of price/weight value, many do run Enzos, however I do believe that WakeMakers has released or is about to release an ExactFit bag for the Mojo.

WakeMakers has UniversalFit (like Enzos), CustomFit ($$$$) and most recently ExactFit where the interior is 3D scanned.

For the most part, it should be plug and play once you get the fittings....you'll need 4 vent plugs and 8 Quick Connect fittings.

I just put a pair in my Craz and they just swapped in. Don't forget to adjust your ballast timers too.

Here are the fittings:
https://www.wakemakers.com/fly-high-...ting-w731.html

https://www.wakemakers.com/fly-high-...ting-w743.html

[c04rsx-sm]

In terms of price/weight value, many do run Enzos, however I do believe that WakeMakers has released or is about to release an ExactFit bag for the Mojo.

WakeMakers has UniversalFit (like Enzos), CustomFit ($$$$) and most recently ExactFit where the interior is 3D scanned.

For the most part, it should be plug and play once you get the fittings....you'll need 4 vent plugs and 8 Quick Connect fittings.

I just put a pair in my Craz and they just swapped in. Don't forget to adjust your ballast timers too.

Here are the fittings:
https://www.wakemakers.com/fly-high-...ting-w731.html

https://www.wakemakers.com/fly-high-...ting-w743.html

I just put a pair in my 16 craz... did you have to modify the hose it seems stock puts the fitting right in center of stock bags and the enzo bags have the fittings closer to each side...?

[RC_Hinojosa]

I just put a pair in my 16 craz... did you have to modify the hose it seems stock puts the fitting right in center of stock bags and the enzo bags have the fittings closer to each side...?

I did modify the hose....instead of the two overflow fittings joining a tee to the vent line like on the factory, I added a vent plug and just had a single line coming off the top of the bag since the distance between the top fittings is different.

Here is a crude drawing if it helps...

Sent from my Note9 using Tapatalk

[Edo88]

Would it be beneficial to get a pair pretty much everyone one I know surfs regular. Was thinking about just getting on of those bags.


Sent from my iPhone using Tapatalk

[KnoxMojo]

Edo88, have you considered just adding some "lead" weight or a flyhigh sack? I run 1100s in our Mojo and keep a 400 sack and pump for the times we need more weight. I also have 300 pounds of "lead" to move around. I put it under the seat on the side of the surfer. Wakemakers has a new Supa Tsunami pump that is 1700 gph. You could swap that bag from side to side fairly quickly. Don't forget to ask on here for the forum discount code. Good luck!

[RC_Hinojosa]

Would it be beneficial to get a pair pretty much everyone one I know surfs regular. Was thinking about just getting on of those bags.


Sent from my iPhone using Tapatalk

It's my understanding that the 1100s don't fill completely and are really more like 900s so you could have a large enough variance between sides that you list more than intended. Even if no one surfs goofy, you'd benefit from the additional weight and worry less about moving people around. If you do decide to run a pair, you'll also likely want to add some lead in the nose ~400lbs (in addition to IBS) to keep your pitch down and lengthen the pocket.

[Edo88]

Yeah I thought about the lead but I talked to a buddy that runs 1100’s and lead on his 17 mojo and he wants the 1450’s as well. So I’m just getting some ideas on which route I wanna go. Makes sense on getting the pair appreciate all the input guys


Sent from my iPhone using Tapatalk

[lakelife101]

Cheaper to go straight through fatsac.com for custom sacs if you want flyn high stuff in my opinion. They just quoted be some for Supra the same length as Enzo to fit my boat in Black with fittings for 415. 8-10 day lead time. They are selling custom sacs now without having to go through a dealer.


Sent from my iPhone using Tapatalk

[Edo88]

Cheaper to go straight through fatsac.com for custom sacs if you want flyn high stuff in my opinion. They just quoted be some for Supra the same length as Enzo to fit my boat in Black with fittings for 415. 8-10 day lead time. They are selling custom sacs now without having to go through a dealer.


Sent from my iPhone using Tapatalk

Dang that’s cheap Thanks for the info


Sent from my iPhone using Tapatalk