FAE Install Pics

**RC_Hinojosa** · 04-09-2018, 12:44 PM

Excellent "How-To" with photos explaining the install process. Admins should make this a sticky!

Corvette8189, I'll be messaging you next pay period

**dusty2221** · 04-09-2018, 01:38 PM

Originally Posted by RC_Hinojosa

Excellent "How-To" with photos explaining the install process. Admins should make this a sticky!

Corvette8189, I'll be messaging you next pay period

You might get lucky and win one at the Jam this year....

**RC_Hinojosa** · 04-09-2018, 02:26 PM

Originally Posted by dusty2221

You might get lucky and win one at the Jam this year....

That's if I can remember to leave the tie-up early enough... I think we were having too good of a time, LOL!!

By the time we yanked the boat out of the water it was too late to purchase raffle tickets...I had a hundo burning a hole in my pocket too

**KnoxMojo** · 04-09-2018, 02:38 PM

There wasn't any baffle to remove or it wasn't necessary to remove on my 15 Mojo.

**kaneboats** · 04-09-2018, 04:00 PM

Originally Posted by yearround

I have an 08 LSV. We need to install/remove the platform every time we use the boat from parking in the garage. Is a connection similar to this possible for my boat? the connection to the platform seemed cumbersome to remove/replace so frequently and that the platform seems to wiggle much more than would be acceptable for a connection through the hull.

thank you

I have the 2008 LSV and did the install last year with the quick connects. I take my platform off every time I go out so it will fit in the garage. It is as easy as 4 pins instead of two. I bought some nicer pins at Lowes so they all match. I have pics I can post from my install if you think it would help anyone.

**corvette8189** · 04-09-2018, 04:12 PM

Thanks
Just let me know when your ready.

**Catman** · 04-09-2018, 09:59 PM

I bought mine from you last year when you became a dealer I plan on doing the install this weekend . Thanks for the step by step

**corvette8189** · 04-09-2018, 10:09 PM

Awesome, if you have any questions just let me know.

**98outback** · 04-10-2018, 12:34 PM

Originally Posted by corvette8189

I'm not sure, probably for emissions or something. I do know that it chokes a 4in diameter to about 13/4.
Now removing the restrictive baffle you will gain performance and your RPM's will be less when surfing.

Will it void warranty?

**rdlangston13** · 04-10-2018, 01:07 PM

I don’t think it would void your warranty since they now offer them from the dealer. It may need to be dealer installed though.

Sent from my iPhone using Tapatalk

Thread: FAE Install Pics

Thread Tools

Display

Posting Permissions