Page 1 of 15 12311 ... LastLast
Results 1 to 10 of 149
  1. #1
    Join Date
    Feb 2017
    Location
    Wichita Falls
    Posts
    129

    Default FAE Install Pics

    Posted on the Facebook Page and figured id post it here as well.
    I'm a dealer for FAE so if you have any questions or would like to purchase one just send me a message.

    Start off with removing the stock flapper and 4 screws that hold the through hull connection together.


    Then undo the 2 clamps on the inside


    Next takes some patience to get the through hole connection off. I used the debond I got with the install kit and a putty knife to help get it loose then used the shims and a mallet. Grabbed it with some pliers and moved it left, right, up, and down and hit the shims in more.

    Last edited by corvette8189; 04-06-2018 at 03:10 PM.
    FAE Dealer Message me for a Discount!

    2017 Moomba Mojo Surf Edition
    4600LB Ballast- Enzo Bags & Lead
    Fresh Air Exhaust
    4 Rev 10 Tower Speakers

  2. #2
    Join Date
    Feb 2017
    Location
    Wichita Falls
    Posts
    129

    Default



    Then scrape all the access sealant off


    Next is changing the baffle if you choose to do so.

    Undo these 4 clamps and have a person on the outside pull the hose with some pliers out of the exhaust outlet of the boat.
    Inside use a long skinny flat head screwdriver to help separate the hose from the pipe.
    FAE Dealer Message me for a Discount!

    2017 Moomba Mojo Surf Edition
    4600LB Ballast- Enzo Bags & Lead
    Fresh Air Exhaust
    4 Rev 10 Tower Speakers

  3. #3
    Join Date
    Feb 2017
    Location
    Wichita Falls
    Posts
    129

    Default

    Restrictive Baffle on the right.

    Reverse order going back together.

    Then the nervous part drilling into your expensive boat. Start in reverse to minimize chipping.
    Line up the diagram and drill away.


    Then put a bunch of sealant on the FAE and put it on.
    Internal Flapper showed below.


    Install the provided washers and bolts and tighten her down. Then reinstall the hose clamps (not shown)
    FAE Dealer Message me for a Discount!

    2017 Moomba Mojo Surf Edition
    4600LB Ballast- Enzo Bags & Lead
    Fresh Air Exhaust
    4 Rev 10 Tower Speakers

  4. #4
    Join Date
    Feb 2017
    Location
    Wichita Falls
    Posts
    129

    Default

    All done.



    Let me know if you have any questions.
    FAE Dealer Message me for a Discount!

    2017 Moomba Mojo Surf Edition
    4600LB Ballast- Enzo Bags & Lead
    Fresh Air Exhaust
    4 Rev 10 Tower Speakers

  5. #5
    Join Date
    Apr 2013
    Location
    Knoxville TN
    Posts
    3,065

    Default

    When did SC start putting baffles in the boats?

    Sent from my P00I using Tapatalk
    2018 Supra SL400

  6. #6
    Join Date
    Jan 2008
    Location
    colorado
    Posts
    844

    Default

    I have an 08 LSV. We need to install/remove the platform every time we use the boat from parking in the garage. Is a connection similar to this possible for my boat? the connection to the platform seemed cumbersome to remove/replace so frequently and that the platform seems to wiggle much more than would be acceptable for a connection through the hull.

    thank you
    19 Mondo
    08 LSV, forever loved

  7. #7
    Join Date
    Feb 2017
    Location
    Wichita Falls
    Posts
    129

    Default

    Quote Originally Posted by MJHSupra View Post
    When did SC start putting baffles in the boats?

    Sent from my P00I using Tapatalk
    I believe all the Raptor engines have them.
    FAE Dealer Message me for a Discount!

    2017 Moomba Mojo Surf Edition
    4600LB Ballast- Enzo Bags & Lead
    Fresh Air Exhaust
    4 Rev 10 Tower Speakers

  8. #8
    Join Date
    Feb 2017
    Location
    Wichita Falls
    Posts
    129

    Default

    Quote Originally Posted by yearround View Post
    I have an 08 LSV. We need to install/remove the platform every time we use the boat from parking in the garage. Is a connection similar to this possible for my boat? the connection to the platform seemed cumbersome to remove/replace so frequently and that the platform seems to wiggle much more than would be acceptable for a connection through the hull.

    thank you
    Unfortunately not on the dual exhaust but they do have a quick release option available. Check more about it on the options page. Link below
    http://www.freshairexhaust.com/about-us/fae-options/
    FAE Dealer Message me for a Discount!

    2017 Moomba Mojo Surf Edition
    4600LB Ballast- Enzo Bags & Lead
    Fresh Air Exhaust
    4 Rev 10 Tower Speakers

  9. #9
    Join Date
    Jan 2006
    Location
    Jacksonville, FL
    Posts
    608

    Default

    What is the purpose of the baffles?

  10. #10
    Join Date
    Feb 2017
    Location
    Wichita Falls
    Posts
    129

    Default

    I'm not sure, probably for emissions or something. I do know that it chokes a 4in diameter to about 13/4.
    Now removing the restrictive baffle you will gain performance and your RPM's will be less when surfing.
    FAE Dealer Message me for a Discount!

    2017 Moomba Mojo Surf Edition
    4600LB Ballast- Enzo Bags & Lead
    Fresh Air Exhaust
    4 Rev 10 Tower Speakers

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •