Results 1 to 10 of 149
Thread: FAE Install Pics
-
04-06-2018, 02:58 PM #1
FAE Install Pics
Posted on the Facebook Page and figured id post it here as well.
I'm a dealer for FAE so if you have any questions or would like to purchase one just send me a message.
Start off with removing the stock flapper and 4 screws that hold the through hull connection together.
Then undo the 2 clamps on the inside
Next takes some patience to get the through hole connection off. I used the debond I got with the install kit and a putty knife to help get it loose then used the shims and a mallet. Grabbed it with some pliers and moved it left, right, up, and down and hit the shims in more.
Last edited by corvette8189; 04-06-2018 at 03:10 PM.
FAE Dealer Message me for a Discount!
2017 Moomba Mojo Surf Edition
4600LB Ballast- Enzo Bags & Lead
Fresh Air Exhaust
4 Rev 10 Tower Speakers
-
04-06-2018, 02:59 PM #2
Then scrape all the access sealant off
Next is changing the baffle if you choose to do so.
Undo these 4 clamps and have a person on the outside pull the hose with some pliers out of the exhaust outlet of the boat.
Inside use a long skinny flat head screwdriver to help separate the hose from the pipe.
FAE Dealer Message me for a Discount!
2017 Moomba Mojo Surf Edition
4600LB Ballast- Enzo Bags & Lead
Fresh Air Exhaust
4 Rev 10 Tower Speakers
-
04-06-2018, 03:00 PM #3
Restrictive Baffle on the right.
Reverse order going back together.
Then the nervous part drilling into your expensive boat. Start in reverse to minimize chipping.
Line up the diagram and drill away.
Then put a bunch of sealant on the FAE and put it on.
Internal Flapper showed below.
Install the provided washers and bolts and tighten her down. Then reinstall the hose clamps (not shown)
FAE Dealer Message me for a Discount!
2017 Moomba Mojo Surf Edition
4600LB Ballast- Enzo Bags & Lead
Fresh Air Exhaust
4 Rev 10 Tower Speakers
-
04-06-2018, 03:01 PM #4
All done.
Let me know if you have any questions.FAE Dealer Message me for a Discount!
2017 Moomba Mojo Surf Edition
4600LB Ballast- Enzo Bags & Lead
Fresh Air Exhaust
4 Rev 10 Tower Speakers
-
04-06-2018, 05:33 PM #5
When did SC start putting baffles in the boats?
Sent from my P00I using Tapatalk2018 Supra SL400
-
04-06-2018, 05:44 PM #6
I have an 08 LSV. We need to install/remove the platform every time we use the boat from parking in the garage. Is a connection similar to this possible for my boat? the connection to the platform seemed cumbersome to remove/replace so frequently and that the platform seems to wiggle much more than would be acceptable for a connection through the hull.
thank you19 Mondo
08 LSV, forever loved
-
04-06-2018, 05:52 PM #7
-
04-06-2018, 05:54 PM #8
Unfortunately not on the dual exhaust but they do have a quick release option available. Check more about it on the options page. Link below
http://www.freshairexhaust.com/about-us/fae-options/FAE Dealer Message me for a Discount!
2017 Moomba Mojo Surf Edition
4600LB Ballast- Enzo Bags & Lead
Fresh Air Exhaust
4 Rev 10 Tower Speakers
-
04-06-2018, 11:35 PM #9
What is the purpose of the baffles?
-
04-09-2018, 10:33 AM #10
I'm not sure, probably for emissions or something. I do know that it chokes a 4in diameter to about 13/4.
Now removing the restrictive baffle you will gain performance and your RPM's will be less when surfing.FAE Dealer Message me for a Discount!
2017 Moomba Mojo Surf Edition
4600LB Ballast- Enzo Bags & Lead
Fresh Air Exhaust
4 Rev 10 Tower Speakers