April 2018 Picture Thread

[trayson]

Since I believe that the Nautiue Logic unit is mimicing a paddlewheel signal but with the GPS being the source of the input, it doesn't surprise me that your readout would be the same. Under the dash, probably over by the ignition should be a little dial knob. that allows you to adjust your speedo reading. go out and use your app again and turn the dial until the speedo reads the same as the GPS on your app, then you should be good to go.

[Shoebox]

Since I believe that the Nautiue Logic unit is mimicing a paddlewheel signal but with the GPS being the source of the input, it doesn't surprise me that your readout would be the same. Under the dash, probably over by the ignition should be a little dial knob. that allows you to adjust your speedo reading. go out and use your app again and turn the dial until the speedo reads the same as the GPS on your app, then you should be good to go.

I did that. That knob adjusts the dial speedometer, doesn't do anything for the computer/cruise control.

[trayson]

I did that. That knob adjusts the dial speedometer, doesn't do anything for the computer/cruise control.

Ah, then you need to go into the settings of your speed/cruise. I know that on my Perfect pass, I have the ability to adjust the digital readout of the speed that's showing on that unit. it's in the area where I'd adjust where I adjust KDW and NN I believe (the agressiveness and sensitivity of my Perfect pass). I have to imagine that whatever system is in your boat can do the same. You just have to get into the speed calibration menu.

looks like this thread might provide some insight. you're looking for "offset".
https://forum.moomba.com/showthread....lp-for-15-Mojo

[Shoebox]

Ah, then you need to go into the settings of your speed/cruise. I know that on my Perfect pass, I have the ability to adjust the digital readout of the speed that's showing on that unit. it's in the area where I'd adjust where I adjust KDW and NN I believe (the agressiveness and sensitivity of my Perfect pass). I have to imagine that whatever system is in your boat can do the same. You just have to get into the speed calibration menu.

looks like this thread might provide some insight. you're looking for "offset".
https://forum.moomba.com/showthread....lp-for-15-Mojo

Thanks, that's exactly what I needed. Now I need to see if my computer has that offset function. I dug through it a bit yesterday but don't remember seeing that. Of course I didn't know that's what I was looking for.

[Broke Pilot]

So pumped for 2 full days on the water!! Finally get to try my new Doomswell, and the kids are asking about trying wakesurfing! Gonna be a good summer. Pictures to follow... lol

[russellsmojo]

Unreal unicorn day in Texas. No other boats in the cove for at least an hour.


Sent from my iPhone using Tapatalk

[DFTR Josh]

Unreal unicorn day in Texas. No other boats in the cove for at least an hour.

Yep that doesn't suck at all, that was my last trip out in UT. Hoping for greatness tomorrow depending what the breeze is doing.

[rdlangston13]

Beautiful day on Livingston! Got some boarding, surfing, and cruising in. Trying to teach the little one to fish now.

Heidi learned something new today.





Sent from my iPhone using Tapatalk

[Broke Pilot]

Was a beautiful day on Conroe... was surprisingly smooth for the amount of boats out. Daughter started it off right, first ride of the season for her. Popped up like an old pro. She went for some good wake crossings and had a major face plant.


My wife boarded a few rounds, but never got any pics somehow.
I got out on the new Doomswell. It’s fun, it wants to turn and spin even with all 3 fins. It lacks a little push though. I hopped on my old Byerly just to check if the wave was still there.
Back to the Doomswell, I built a rider profile and we just played with it for an hour with no autowake. Got a pretty massive wave rolling. Now I wanna pull the outer fins and see if I can skim the new kid!
First ride on the new toy!


Somehow didn’t get any rope-less pics.

[russellsmojo]

Was a beautiful day on Conroe... was surprisingly smooth for the amount of boats out. Daughter started it off right, first ride of the season for her. Popped up like an old pro. She went for some good wake crossings and had a major face plant.


My wife boarded a few rounds, but never got any pics somehow.
I got out on the new Doomswell. It’s fun, it wants to turn and spin even with all 3 fins. It lacks a little push though. I hopped on my old Byerly just to check if the wave was still there.
Back to the Doomswell, I built a rider profile and we just played with it for an hour with no autowake. Got a pretty massive wave rolling. Now I wanna pull the outer fins and see if I can skim the new kid!
First ride on the new toy!


Somehow didn’t get any rope-less pics.

Don’t feel bad...Lots of people cannot go ropeless. Ha!

That is a pretty awesome day you had! Funny you bailed on autowake. I did as well on last set. I don’t know what it’s doing sometimes.


Sent from my iPhone using Tapatalk