Dang ole Craz

[chawk610]

CRAZ OWNERS... how tall is the tallest point sitting on the trailer??

[rdlangston13]

I like where this is going!


Sent from my iPhone using Tapatalk

[RC_Hinojosa]

You'd need a minimum 8ft garage door opening with tower down.

Sent from my SAMSUNG-SM-G935A using Tapatalk

[chawk610]

Snap...ok, i gotty 7. Hmmm having a lookie tomorrow. Maybe not mention the garage door part to kitty

[rdlangston13]

I couldn’t even fit my LSV in a 7 ft door


Sent from my iPhone using Tapatalk

[russellsmojo]

Snap...ok, i gotty 7. Hmmm having a lookie tomorrow. Maybe not mention the garage door part to kitty

7ft....8ft....It’s so hard to get an exact measurement. Driveway angle, tire air pressure, and hitch height. Probably best to buy and then try once you own


Sent from my iPhone using Tapatalk

[RC_Hinojosa]

Probably best to buy and then try once you own

HAHAHAHAHA

Definitely! Bruh buy first, ask questions later!!

Sent from my SAMSUNG-SM-G935A using Tapatalk

[chawk610]

Wanna give me 20k for the ls. Lordy. Thing is decked out20180331_115807.jpg

[korey]

I took very thorough measurements of 2 different boats before I signed on the line. Even an 8' door takes some creativity. The catalog advertises it as 92 or 94" (I cant remember now), but that's without board racks, and the spring assist cranked up to the point where it is very easy to lower the tower, but it runs out of stroke before it's actually that low. By my measurements, you have to remove board racks (one screw on each rack), and loosen the assist mechanism to the point where it is nearly doing nothing to get through an 8' door. This was on 2 boats at my dealer. measurements were made on flat ground with the tongue height similar to what my F150 has with a normal 2" drop ball. My driveway is particularly friendly because of the hill in front of the garage has the tongue of the trailer at it's lowest point when the middle of the boat passes the threshold, so i think I'm safe. I'll be finding out the hard way mid-may (spray date 4/23)

[jtatexc]

I had to take the tension straps off the tower on my craz to get the extra 2” I needed for my 8’ door, now I brush the weather stripping at 7’11”


Sent from my iPhone using Tapatalk