Results 1 to 4 of 4
-
03-22-2018, 05:39 PM #1Junior Member
- Join Date
- Mar 2018
- Posts
- 2
Ballast don't auto drain need help
So I have a 2011 Moomba Mobius lsv and the ballast fill like normal you can watch the percentage gauge go up like it is should but when i empty them the center and left percentages drop from 100% to 90% to 0% and the pump stops. If I cycle the switch on and off it will empty for about 10 sec and I have to cycle the switches again and again it's a real pain in the you know what. They will eventually fully empty though. I messed with the times in the menu but it didn't help. I's there a bad sensor or something. Any help would be great.
-
03-23-2018, 08:42 AM #2
does this only occur when draining? You don't have similar issue filling?
I had to replace the ECM on my Supra to fix a similar issue, pumps would only run for a short time and turn off, took over an hour to fill and longer to drain. $700 later problem solved.2017 Centurion Ri237
2013 Supra SA450 - Sold
2006 Mobius LSV - Sold
2004 Stingray 190LS - Sold
2016 Nissan Titan XD - Tow Rig
-
03-23-2018, 10:18 AM #3Junior Member
- Join Date
- Mar 2018
- Posts
- 2
This only happens when draining. When i cycle the switches the pumps run for 10 sec so i can still drain them in about 5 min thank god but i have to just sit there cycling.
-
03-23-2018, 01:48 PM #4
try resetting timers first
A Day at the Lake...Priceless
A Day in Powder...Endless
Joe V
2012 Möbius XLV~ Loaded & Exiled
2007 Outback V ~ sold