Ppi 600.2 rev 10 amp settings

[beat taco]

Once this is mounted I will have no way to adjust it. What are the most optimal settings for a pair of REV 10s.

Sent from my SM-G930V using Tapatalk

[MLA]

Lots of variables that make it hard to ballpark the gain. These amps are notorious for the Hz POTS to be inaccurate, So thinking you have the dial set to 120Hz for example, it could be off 25Hz +/-. Makes it tough to set it on the bench and install the amp where you cant do a final run through by ear.

[Broke Pilot]

I’d like to say whatever I left it at but it was pushing a 410 lol
Get yourself a little right angle flat head or a pick set. It’s not ideal but it works. I had a hard time adjusting them once minted too

[beat taco]

I started screwing with it unfortunately.

Sent from my SM-G930V using Tapatalk

[beat taco]

Going in a glove box so I just wanted to copy someone's set up.

Sent from my SM-G930V using Tapatalk