Results 1 to 5 of 5
Thread: Ppi 600.2 rev 10 amp settings
-
02-27-2018, 07:28 PM #1
Ppi 600.2 rev 10 amp settings
Once this is mounted I will have no way to adjust it. What are the most optimal settings for a pair of REV 10s.
Sent from my SM-G930V using Tapatalk-Jake
-
02-27-2018, 07:44 PM #2
Lots of variables that make it hard to ballpark the gain. These amps are notorious for the Hz POTS to be inaccurate, So thinking you have the dial set to 120Hz for example, it could be off 25Hz +/-. Makes it tough to set it on the bench and install the amp where you cant do a final run through by ear.
-
02-27-2018, 09:26 PM #3
I’d like to say whatever I left it at but it was pushing a 410 lol
Get yourself a little right angle flat head or a pick set. It’s not ideal but it works. I had a hard time adjusting them once minted tooOverkill is underrated
2006 Supra 24SSV Gravity Games- traded but never forgotten
2017 Supra SA 400
-
02-27-2018, 09:31 PM #4
I started screwing with it unfortunately.
Sent from my SM-G930V using Tapatalk-Jake
-
02-28-2018, 11:52 AM #5
Going in a glove box so I just wanted to copy someone's set up.
Sent from my SM-G930V using Tapatalk-Jake