Results 1 to 5 of 5
-
02-19-2018, 05:04 PM #1Junior Member
- Join Date
- Feb 2018
- Location
- Chattanooga, TN
- Posts
- 13
Question about lead/steel ballast permanently in a Max
I've been toying with the idea of putting 750 lbs of lead/steel bags per side under the seats in my Max when it gets here. I was planning on just leaving the additional weight in permanently. The boat will be stored on a lift and I was just wondering if there was any kind of danger in adding 1500 lbs total to the support structure (hull, stringers, etc) since it will be resting solely on two runners.
Any thoughts?
-
02-19-2018, 11:47 PM #2Senior Member
- Join Date
- Aug 2011
- Posts
- 2,522
No, but you better buy a lift that can handle the weight
http://www.instgram.com/jlyons30
2002 Moomba Mobius LSV - Sold
2006 Moomba Mobius LSV - Sold
2017 Moomba Craz - Enzos, Lead
-
02-21-2018, 12:50 AM #3Junior Member
- Join Date
- Feb 2018
- Location
- Chattanooga, TN
- Posts
- 13
Ya think? Lol... I have a 7500 lb lift.
-
02-21-2018, 08:03 AM #4Senior Member
- Join Date
- Aug 2011
- Posts
- 2,522
I dunno, your the one asking. You'll be near the max of the lift with people on board.
http://www.instgram.com/jlyons30
2002 Moomba Mobius LSV - Sold
2006 Moomba Mobius LSV - Sold
2017 Moomba Craz - Enzos, Lead
-
02-21-2018, 08:22 AM #5Junior Member
- Join Date
- Feb 2018
- Location
- Chattanooga, TN
- Posts
- 13
I'm not worried about the lift. The lift can easily support the boat with the additional weight. What I was asking about is whether or not the additional weight would cause undo stress on the stringers or the hull when on the lift. Naturally, the boat can handle much more in the water since the water distributes pressure evenly across the hull, but on a lift with two runners all that weight is now pressing down on two narrow strips. Truth be told, it's probably a question better answered by the engineers at Skiers Choice.