Results 1 to 6 of 6
Thread: Kicker 800.5 wiring
-
02-17-2018, 01:12 PM #1
Kicker 800.5 wiring
How is skiers choice wiring up the kicker 800.5 amp to 6 in boat speakers. I know the 5th channel is dedicated sub. Are they using 2 2 ohm speakers for channels 1 and 2 and then 4 4 ohm speakers for channels 3 and 4?
-
02-17-2018, 01:25 PM #2
Kicker 800.5 wiring
..............
Last edited by PuraVida; 02-17-2018 at 01:30 PM.
2016 Mojo
-
02-17-2018, 01:29 PM #3
You can sort of see it in the bottom right. I think they bridge the cabin speakers and the bow are on a separate channel.
Sent from my iPhone using Tapatalk2016 Mojo
-
02-17-2018, 03:53 PM #4
All are 4 ohm speakers. bow pair on 2 chnls, aft port side parallel on one chnl, aft STBD pair parallel on last chnl. Only logical configuration.
-
02-18-2018, 08:08 PM #5
-
02-27-2018, 12:55 PM #6Junior Member
- Join Date
- Feb 2018
- Posts
- 1
Hi...This harness is a harness for adding an aftermarket bluetooth but is perfect for teeing in a AMP. Just cut off the plugs that were supposed to go the the bluetooth which are speaker wires and connect the red and black power wires back together between the radio plugs and your good to go.