Results 1 to 6 of 6
Thread: Kicker 800.5 wiring
-
02-17-2018, 01:12 PM #1
Senior Member
- Join Date
- Jan 2006
- Location
- Jacksonville, FL
- Posts
- 608
Kicker 800.5 wiring
How is skiers choice wiring up the kicker 800.5 amp to 6 in boat speakers. I know the 5th channel is dedicated sub. Are they using 2 2 ohm speakers for channels 1 and 2 and then 4 4 ohm speakers for channels 3 and 4?
-
02-17-2018, 01:25 PM #2
Senior Member
- Join Date
- May 2016
- Location
- Fargo, ND
- Posts
- 127
Kicker 800.5 wiring
..............
Last edited by PuraVida; 02-17-2018 at 01:30 PM.
2016 Mojo
-
02-17-2018, 01:29 PM #3
Senior Member
- Join Date
- May 2016
- Location
- Fargo, ND
- Posts
- 127
You can sort of see it in the bottom right. I think they bridge the cabin speakers and the bow are on a separate channel.
Sent from my iPhone using Tapatalk2016 Mojo
-
02-17-2018, 03:53 PM #4
Senior Member
- Join Date
- Oct 2010
- Location
- Lake Wylie NC Area
- Posts
- 2,467
All are 4 ohm speakers. bow pair on 2 chnls, aft port side parallel on one chnl, aft STBD pair parallel on last chnl. Only logical configuration.
-
02-18-2018, 08:08 PM #5
Senior Member
- Join Date
- Aug 2011
- Location
- Commerce Lake, MI
- Posts
- 2,145
Agreed. That’s how I did it.
Originally Posted by MLA
Sent from my iPhone using Tapatalk2017 Moomba Craz
-
02-27-2018, 12:55 PM #6
Junior Member
- Join Date
- Feb 2018
- Posts
- 1
Hi...This harness is a harness for adding an aftermarket bluetooth but is perfect for teeing in a AMP. Just cut off the plugs that were supposed to go the the bluetooth which are speaker wires and connect the red and black power wires back together between the radio plugs and your good to go.
Reply With Quote