Results 1 to 9 of 9
  1. #1
    Join Date
    Aug 2016
    Posts
    173

    Default Loki-2 2400 lumen high power LED drain light fixture

    https://www.boatpluglight.com/collec...-2-solid-brass

    Anyone have any experience with this item? Looking for an easy way to add some underwater light to my boat.

    Thoughts?
    2017 Supra SA400 (750 lbs lead)
    2017 Ford F250 Super Duty
    2016 Moomba Mojo Surf Edition (Sold)

  2. #2
    Join Date
    Jul 2017
    Location
    Charlotte, NC
    Posts
    23

    Default

    I was eyeing this initially but after some further looking, I’m leaning towards the Electra instead.

    Simple install, triple the output and comes in RGB.

    Sorry no experience with either though.

    Check it out... https://boatpluglight.myshopify.com/...-drain-fitting


    Sent from my iPhone using Tapatalk
    Garrett

    2017 Moomba Mojo
    Flow 2.0 Surf MAX Package
    Black/Brittany Blue Metal Flake
    w/ Striker Graphics

  3. #3
    Join Date
    Oct 2017
    Location
    Sylvan Lake
    Posts
    4

    Default

    Anyone know if there is wiring to the back of the boat to tie in the underwater lights when they are not factory installed.
    2017 Supra SE 550

  4. #4
    Join Date
    Aug 2011
    Location
    Commerce Lake, MI
    Posts
    1,068

    Default

    In the new Moombas, yes.


    Sent from my iPhone using Tapatalk
    2017 Moomba Craz

  5. #5
    Join Date
    Oct 2017
    Location
    Sylvan Lake
    Posts
    4

    Default

    Any idea where?
    2017 Supra SE 550

  6. #6
    Join Date
    Aug 2011
    Location
    Commerce Lake, MI
    Posts
    1,068

    Default

    In the new Moomba’s (like my 2017 Craz) there is a wire with a crimp on it behind the plastic panel on the stern of the boat, inside the engine bay, behind the engine. You have to remover the black panel to see it. When you lift up the center cushion/engine cover, look at the hinge, then look under the hinge. That is the black panel,you need to remove, and the wire is up under the gunwale on the right side as you are looking back towards the stern of the boat.


    Sent from my iPad using Tapatalk
    2017 Moomba Craz

  7. #7
    Join Date
    Oct 2017
    Location
    Sylvan Lake
    Posts
    4

    Default

    Awesome thanks for the info, I will have a look and see if it is the same on my supra.
    2017 Supra SE 550

  8. #8
    Join Date
    Nov 2014
    Posts
    650

    Default

    Quote Originally Posted by Stazi View Post
    In the new Moomba’s (like my 2017 Craz) there is a wire with a crimp on it behind the plastic panel on the stern of the boat, inside the engine bay, behind the engine. You have to remover the black panel to see it. When you lift up the center cushion/engine cover, look at the hinge, then look under the hinge. That is the black panel,you need to remove, and the wire is up under the gunwale on the right side as you are looking back towards the stern of the boat.


    Sent from my iPad using Tapatalk
    What switch is that wire connected to stazi?

    Sent from my SM-G930W8 using Tapatalk
    2016 Craz.
    Enzo bags.

  9. #9
    Join Date
    Aug 2011
    Location
    Commerce Lake, MI
    Posts
    1,068

    Default

    One of the unmarked accessory switches. I don’t remember which one off hand.


    Sent from my iPhone using Tapatalk
    2017 Moomba Craz

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •