2014 Mondo owners, help needed

**Shoebox** · 01-19-2018, 05:56 PM

I have a 2014 Mondo and I'm trying to install a Nautic Laugic GPS unit. Where the paddlewheel connector is supposed to be, my wires appear to be spliced.

Anyone with a 2014 Mondo, is this how yours are, or do you have a connector? If they're all like this, then I must be looking in the wrong place for the connector.

**parrothd** · 01-19-2018, 06:27 PM

Originally Posted by Shoebox

I have a 2014 Mondo and I'm trying to install a Nautic Laugic GPS unit. Where the paddlewheel connector is supposed to be, my wires appear to be spliced.

Anyone with a 2014 Mondo, is this how yours are, or do you have a connector? If they're all like this, then I must be looking in the wrong place for the connector.

Naw, they just shrink wrapped the connector, if it gets water logged the speedo goes crazy. You probably want the other end so you can mount the GPS Puck near the dash?

**Shoebox** · 01-19-2018, 06:31 PM

That is not a shrink wrapped connector. It's too small. It should be roughly the size of the gray one shown there.

Here are the male and female connectors of the GPS unit.

**jstenger** · 01-19-2018, 10:22 PM

It looks like the cable was cut and butt spliced back together.

Sent from my SM-G930V using Tapatalk

**Shoebox** · 01-19-2018, 10:57 PM

Originally Posted by jstenger

It looks like the cable was cut and butt spliced back together.

Sent from my SM-G930V using Tapatalk

That's what I'm thinking, but I want to make sure before I cut it out and put in connectors.

**JD14Mondo** · 01-20-2018, 01:15 PM

I installed this on my 14 Mondo. The only thing the paddle wheel is used for is water temp. It is the brown and white wire. 6088EBCC-7711-4FC5-AF91-0E6030D9DEE5.jpg 0C22AAF3-B938-4560-8762-4F2A74C5B33C.jpg

**JD14Mondo** · 01-20-2018, 01:18 PM

This is the gps unit connector. 2E2CB5FF-8A7C-41FA-A0BA-16C2219F91D5.jpg

**Shoebox** · 01-20-2018, 01:18 PM

Originally Posted by JD14Mondo

I installed this on my 14 Mondo. The only thing the paddle wheel is used for is water temp. It is the brown and white wire. 6088EBCC-7711-4FC5-AF91-0E6030D9DEE5.jpg 0C22AAF3-B938-4560-8762-4F2A74C5B33C.jpg

Thanks for that. That is a completely different connector.

**Shoebox** · 01-20-2018, 01:35 PM

Originally Posted by JD14Mondo

This is the gps unit connector. 2E2CB5FF-8A7C-41FA-A0BA-16C2219F91D5.jpg

Can you see the Deutsch connector number? Thanks

**JD14Mondo** · 01-20-2018, 06:48 PM

This is the connector. C7AF6112-1A2B-42E0-8884-CEC1B3108890.jpg

Thread: 2014 Mondo owners, help needed

Thread Tools

Display

2014 Mondo owners, help needed

Posting Permissions